Decorative

•An intermediate switch is used when you have three switches controlling one light. A typical example of this is on a landing. There is a switch at the bottom of the stairs, one at top of the stairs and one at the end of the landing. On this circuit you would need the middle switch to be intermediate (i.e. the one at the top of the stairs) in order for all the switches to function properly. Flawless Screwless low profile metal design with matching metal rocker.

- 10AX rated
- Screwless low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.19
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length
•Width / Depth
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty
•Construction
•IP Rating

•An intermediate switch is used when you have three switches controlling one light. A typical example of this is on a landing. There is a switch at the bottom of the stairs, one at top of the stairs and one at the end of the landing. On this circuit you would need the middle switch to be intermediate (i.e. the one at the top of the stairs) in order for all the switches to function properly. Flawless Screwless low profile metal design with matching metal rocker.

- 10AX rated
- Screwless low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.19
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length
•Width / Depth
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty
•Construction
•IP Rating

•An intermediate switch is used when you have three switches controlling one light. A typical example of this is on a landing. There is a switch at the bottom of the stairs, one at top of the stairs and one at the end of the landing. On this circuit you would need the middle switch to be intermediate (i.e. the one at the top of the stairs) in order for all the switches to function properly. Flawless Screwless low profile metal design with matching metal rocker.

- 10AX rated
- Screwless low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.19
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length
•Width / Depth
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty
•Construction
•IP Rating

•An intermediate switch is used when you have three switches controlling one light. A typical example of this is on a landing. There is a switch at the bottom of the stairs, one at top of the stairs and one at the end of the landing. On this circuit you would need the middle switch to be intermediate (i.e. the one at the top of the stairs) in order for all the switches to function properly. Flawless Screwless low profile metal design with matching metal rocker.

- 10AX rated
- Screwless low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.1705
•Diameter
•Height87.5
•Projection4.3
•Overall Height
•Recessed Depth
•Length
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•An intermediate switch is used when you have three switches controlling one light. A typical example of this is on a landing. There is a switch at the bottom of the stairs, one at top of the stairs and one at the end of the landing. On this circuit you would need the middle switch to be intermediate (i.e. the one at the top of the stairs) in order for all the switches to function properly. Flawless Screwless low profile metal design with matching metal rocker.

- 10AX rated
- Screwless low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.19
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length
•Width / Depth
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty
•Construction
•IP Rating

•An intermediate switch is used when you have three switches controlling one light. A typical example of this is on a landing. There is a switch at the bottom of the stairs, one at top of the stairs and one at the end of the landing. On this circuit you would need the middle switch to be intermediate (i.e. the one at the top of the stairs) in order for all the switches to function properly. Flawless Screwless low profile metal design with matching metal rocker.

- 10AX rated
- Screwless low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.19
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length
•Width / Depth
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty
•Construction
•IP Rating

•An intermediate toggle switch is used when you have three switches controlling one light. A typical example of this is on a landing. There is a switch at the bottom of the stairs, one at top of the stairs and one at the end of the landing. On this circuit you would need the middle switch to be intermediate (i.e. the one at the top of the stairs) in order for all the switches to function properly.

Made from high quality ultra slim, premium grade material.
Complete with integral gasket.
Compliant to all relevant British safety standards.
Minimum mounting depth: 16mm.
Dimensions: 87.5mm x 87.5mm.
Supplied in retail blister with full fitting instructions.
15 year guarantee."

•Gross Weight0.21
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•An intermediate toggle switch is used when you have three switches controlling one light. A typical example of this is on a landing. There is a switch at the bottom of the stairs, one at top of the stairs and one at the end of the landing. On this circuit you would need the middle switch to be intermediate (i.e. the one at the top of the stairs) in order for all the switches to function properly.

Made from high quality ultra slim, premium grade material.
Complete with integral gasket.
Compliant to all relevant British safety standards.
Minimum mounting depth: 16mm.
Dimensions: 87.5mm x 87.5mm.
Supplied in retail blister with full fitting instructions.
15 year guarantee."

•Gross Weight0.21
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•An intermediate toggle switch is used when you have three switches controlling one light. A typical example of this is on a landing. There is a switch at the bottom of the stairs, one at top of the stairs and one at the end of the landing. On this circuit you would need the middle switch to be intermediate (i.e. the one at the top of the stairs) in order for all the switches to function properly.

Made from high quality ultra slim, premium grade material.
Complete with integral gasket.
Compliant to all relevant British safety standards.
Minimum mounting depth: 16mm.
Dimensions: 87.5mm x 87.5mm.
Supplied in retail blister with full fitting instructions.
15 year guarantee."

•Gross Weight0.21
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•An intermediate toggle switch is used when you have three switches controlling one light. A typical example of this is on a landing. There is a switch at the bottom of the stairs, one at top of the stairs and one at the end of the landing. On this circuit you would need the middle switch to be intermediate (i.e. the one at the top of the stairs) in order for all the switches to function properly.

Made from high quality ultra slim, premium grade material.
Complete with integral gasket.
Compliant to all relevant British safety standards.
Minimum mounting depth: 16mm.
Dimensions: 87.5mm x 87.5mm.
Supplied in retail blister with full fitting instructions.
15 year guarantee."

•Gross Weight0.21
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•An intermediate toggle switch is used when you have three switches controlling one light. A typical example of this is on a landing. There is a switch at the bottom of the stairs, one at top of the stairs and one at the end of the landing. On this circuit you would need the middle switch to be intermediate (i.e. the one at the top of the stairs) in order for all the switches to function properly.

Made from high quality ultra slim, premium grade material.
Complete with integral gasket.
Compliant to all relevant British safety standards.
Minimum mounting depth: 16mm.
Dimensions: 87.5mm x 87.5mm.
Supplied in retail blister with full fitting instructions.
15 year guarantee."

•Gross Weight0.21
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, flawless Screwless low profile metal design with matching metal rocker.
10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
- 10AX rated
- Screwless low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.193
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length
•Width / Depth
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, flawless Screwless low profile metal design with matching metal rocker.
10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
- 10AX rated
- Screwless low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.193
•Diameter
•Height87.5
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, flawless Screwless low profile metal design with matching metal rocker.
10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
- 10AX rated
- Screwless low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.178
•Diameter
•Height87.5
•Projection4.3
•Overall Height
•Recessed Depth
•Length
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, flawless Screwless low profile metal design with contrasting metal rocker.
10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
- 10AX rated
- Screwless low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.193
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length
•Width / Depth
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, flawless Screwless low profile metal design with matching metal rocker.
10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
- 10AX rated
- Screwless low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.178
•Diameter
•Height87.5
•Projection4.3
•Overall Height
•Recessed Depth
•Length
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, flawless Screwless low profile metal design with matching metal rocker.
10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
- 10AX rated
- Screwless low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.193
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length
•Width / Depth
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, flawless Screwless low profile metal design with matching metal rocker.
10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
- 10AX rated
- Screwless low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.193
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length
•Width / Depth
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty
•Constructionpremium grade steel
•IP RatingIP20

•2 way toggle switches are generally used when there are two switches controlling one light. A typical example of this is when a room has two entrances (like a through lounge) where there is a switch positioned at either entrance.

Made from high quality ultra slim, premium grade material
Complete with integral gasket for moisture protection
Minimum mounting depth: 16mm
Dimensions: 87.5mm x 87.5mm
Supplied in retail blister with full fitting instructions
Compliant to BS EN 60669-1
15 year guarantee.

•Gross Weight0.21
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•2 way toggle switches are generally used when there are two switches controlling one light. A typical example of this is when a room has two entrances (like a through lounge) where there is a switch positioned at either entrance.

Made from high quality ultra slim, premium grade material
Complete with integral gasket for moisture protection
Minimum mounting depth: 16mm
Dimensions: 87.5mm x 87.5mm
Supplied in retail blister with full fitting instructions
Compliant to BS EN 60669-1
15 year guarantee.

•Gross Weight0.21
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•2 way toggle switches are generally used when there are two switches controlling one light. A typical example of this is when a room has two entrances (like a through lounge) where there is a switch positioned at either entrance.

Made from high quality ultra slim, premium grade material
Complete with integral gasket for moisture protection
Minimum mounting depth: 16mm
Dimensions: 87.5mm x 87.5mm
Supplied in retail blister with full fitting instructions
Compliant to BS EN 60669-1
15 year guarantee.

•Gross Weight0.21
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•2 way toggle switches are generally used when there are two switches controlling one light. A typical example of this is when a room has two entrances (like a through lounge) where there is a switch positioned at either entrance.

Made from high quality ultra slim, premium grade material
Complete with integral gasket for moisture protection
Minimum mounting depth: 16mm
Dimensions: 87.5mm x 87.5mm
Supplied in retail blister with full fitting instructions
Compliant to BS EN 60669-1
15 year guarantee.

•Gross Weight0.21
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•2 way toggle switches are generally used when there are two switches controlling one light. A typical example of this is when a room has two entrances (like a through lounge) where there is a switch positioned at either entrance.

Made from high quality ultra slim, premium grade material
Complete with integral gasket for moisture protection
Minimum mounting depth: 16mm
Dimensions: 87.5mm x 87.5mm
Supplied in retail blister with full fitting instructions
Compliant to BS EN 60669-1
15 year guarantee.

•Gross Weight0.21
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Ideal for providing a safe and simple method of isolating fan units in en-suite bathrooms, family bathrooms, utility rooms, store rooms etc. Often the fan unit will be wired into the lighting circuit for convenience and efficiency. With this kind of installation there is often a need to leave the lighting circuit live whilst isolating the fan for maintenance. Flawless Screwless low profile metal design with matching metal rocker.

- 10AX rated
- Triple Pole
- Screwless low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.194
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length
•Width / Depth
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty
•Construction
•IP Rating

•Ideal for providing a safe and simple method of isolating fan units in en-suite bathrooms, family bathrooms, utility rooms, store rooms etc. Often the fan unit will be wired into the lighting circuit for convenience and efficiency. With this kind of installation there is often a need to leave the lighting circuit live whilst isolating the fan for maintenance. Flawless Screwless low profile metal design with matching metal rocker.

- 10AX rated
- Triple Pole
- Screwless low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.194
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length
•Width / Depth
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty
•Construction
•IP Rating

•Ideal for providing a safe and simple method of isolating fan units in en-suite bathrooms, family bathrooms, utility rooms, store rooms etc. Often the fan unit will be wired into the lighting circuit for convenience and efficiency. With this kind of installation there is often a need to leave the lighting circuit live whilst isolating the fan for maintenance. Flawless Screwless low profile metal design with contrasting metal rocker.

- 10AX rated
- Triple Pole
- Screwless low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.194
•Diameter
•Height87.5
•Projection4.3
•Overall Height
•Recessed Depth
•Length
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty
•Constructionpremium grade steel
•IP Rating

•Ideal for providing a safe and simple method of isolating fan units in en-suite bathrooms, family bathrooms, utility rooms, store rooms etc. Often the fan unit will be wired into the lighting circuit for convenience and efficiency. With this kind of installation there is often a need to leave the lighting circuit live whilst isolating the fan for maintenance. Flawless Screwless low profile metal design with matching metal rocker.

- 10AX rated
- Triple Pole
- Screwless low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.1755
•Diameter
•Height87.5
•Projection4.3
•Overall Height
•Recessed Depth
•Length
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Ideal for providing a safe and simple method of isolating fan units in en-suite bathrooms, family bathrooms, utility rooms, store rooms etc. Often the fan unit will be wired into the lighting circuit for convenience and efficiency. With this kind of installation there is often a need to leave the lighting circuit live whilst isolating the fan for maintenance. Flawless Screwless low profile metal design with matching metal rocker.

- 10AX rated
- Triple Pole
- Screwless low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.194
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length
•Width / Depth
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty
•Construction
•IP Rating

•Ideal for providing a safe and simple method of isolating fan units in en-suite bathrooms, family bathrooms, utility rooms, store rooms etc. Often the fan unit will be wired into the lighting circuit for convenience and efficiency. With this kind of installation there is often a need to leave the lighting circuit live whilst isolating the fan for maintenance. Flawless Screwless low profile metal design with matching metal rocker.

- 10AX rated
- Triple Pole
- Screwless low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.194
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length
•Width / Depth
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty
•Construction
•IP Rating

•Perfect finishing touch to any modern home, flawless Screwless low profile metal design with matching metal rocker.
10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
- 10AX rated
- Screwless low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.202
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length
•Width / Depth
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, flawless Screwless low profile metal design with matching metal rocker.
10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
- 10AX rated
- Screwless low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.202
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length
•Width / Depth
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, flawless Screwless low profile metal design with matching metal rocker.
10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
- 10AX rated
- Screwless low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.1875
•Diameter
•Height87.5
•Projection4.3
•Overall Height
•Recessed Depth
•Length
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, flawless Screwless low profile metal design with contrasting metal rocker.
10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
- 10AX rated
- Screwless low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.202
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length
•Width / Depth
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, flawless Screwless low profile metal design with matching metal rocker.
10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
- 10AX rated
- Screwless low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.1875
•Diameter
•Height87.5
•Projection4.3
•Overall Height
•Recessed Depth
•Length
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, flawless Screwless low profile metal design with matching metal rocker.
10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
- 10AX rated
- Screwless low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.202
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length
•Width / Depth
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, flawless Screwless low profile metal design with matching metal rocker.
10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
- 10AX rated
- Screwless low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.202
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length
•Width / Depth
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty
•Constructionpremium grade steel
•IP RatingIP20

•2 way toggle switches are generally used when there are two switches controlling one light. A typical example of this is when a room has two entrances (like a through lounge) where there is a switch positioned at either entrance.

Made from high quality ultra slim, premium grade material
Complete with integral gasket for moisture protection
Minimum mounting depth: 16mm
Dimensions: 148.5mm x 87.5mm
Supplied in retail blister with full fitting instructions
Compliant to BS EN 60669-1
15 year guarantee.

•Gross Weight0.326
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth148.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•2 way toggle switches are generally used when there are two switches controlling one light. A typical example of this is when a room has two entrances (like a through lounge) where there is a switch positioned at either entrance.

Made from high quality ultra slim, premium grade material
Complete with integral gasket for moisture protection
Minimum mounting depth: 16mm
Dimensions: 148.5mm x 87.5mm
Supplied in retail blister with full fitting instructions
Compliant to BS EN 60669-1
15 year guarantee.

•Gross Weight0.326
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth148.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•2 way toggle switches are generally used when there are two switches controlling one light. A typical example of this is when a room has two entrances (like a through lounge) where there is a switch positioned at either entrance.

Made from high quality ultra slim, premium grade material
Complete with integral gasket for moisture protection
Minimum mounting depth: 16mm
Dimensions: 148.5mm x 87.5mm
Supplied in retail blister with full fitting instructions
Compliant to BS EN 60669-1
15 year guarantee.

•Gross Weight0.326
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth148.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•2 way toggle switches are generally used when there are two switches controlling one light. A typical example of this is when a room has two entrances (like a through lounge) where there is a switch positioned at either entrance.

Made from high quality ultra slim, premium grade material
Complete with integral gasket for moisture protection
Minimum mounting depth: 16mm
Dimensions: 148.5mm x 87.5mm
Supplied in retail blister with full fitting instructions
Compliant to BS EN 60669-1
15 year guarantee.

•Gross Weight0.326
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth148.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20