Decorative

•Ideal for TV & FM/DAB coaxial connections. Screened diplexer enables the signal from one cable to be used for both Digital TV reception and FM DAB reception. Flat Plate low profile design

- 1 x Coaxial TV outlet (female)
- 1 x Coaxial FM/DAB outlet (male)
- Screened
- Ultra low profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 35mm

•Gross Weight0.248
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Ideal for TV & FM/DAB coaxial connections. Screened diplexer enables the signal from one cable to be used for both Digital TV reception and FM DAB reception. Flat Plate low profile design

- 1 x Coaxial TV outlet (female)
- 1 x Coaxial FM/DAB outlet (male)
- Screened
- Ultra low profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 35mm

•Gross Weight0.248
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Secondary or extension telephone socket are used to run additional points of the original master socket. Standard BT type socket with screw type terminals. Flat Plate low profile design

- Extension BT type socket
- Screw terminals
- Ultra low profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 25mm

•Gross Weight0.19
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Secondary or extension telephone socket are used to run additional points of the original master socket. Standard BT type socket with screw type terminals. Flat Plate low profile design

- Extension BT type socket
- Screw terminals
- Ultra low profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 25mm

•Gross Weight0.19
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Secondary or extension telephone socket are used to run additional points of the original master socket. Standard BT type socket with screw type terminals. Flat Plate low profile design

- Extension BT type socket
- Screw terminals
- Ultra low profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 25mm

•Gross Weight0.19
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Secondary or extension telephone socket are used to run additional points of the original master socket. Standard BT type socket with screw type terminals. Flat Plate low profile design

- Extension BT type socket
- Screw terminals
- Ultra low profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 25mm

•Gross Weight0.19
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Secondary or extension telephone socket are used to run additional points of the original master socket. Standard BT type socket with screw type terminals. Flat Plate low profile design

- Extension BT type socket
- Screw terminals
- Ultra low profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 25mm

•Gross Weight0.19
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Secondary or extension telephone socket are used to run additional points of the original master socket. Standard BT type socket with screw type terminals. Flat Plate low profile design

- Extension BT type socket
- Screw terminals
- Ultra low profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 25mm

•Gross Weight0.19
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•The master socket contain a surge arrestor and an R/C circuit filter these are used by your service provider to get a fixed value resistance when they run line checks. Standard BT type socket with screw type terminals. Flat Plate low profile design

- Master BT type socket
- Screw terminals
- Ultralow profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 25mm

•Gross Weight0.19
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•The master socket contain a surge arrestor and an R/C circuit filter these are used by your service provider to get a fixed value resistance when they run line checks. Standard BT type socket with screw type terminals. Flat Plate low profile design

- Master BT type socket
- Screw terminals
- Ultralow profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 25mm

•Gross Weight0.19
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•The master socket contain a surge arrestor and an R/C circuit filter these are used by your service provider to get a fixed value resistance when they run line checks. Standard BT type socket with screw type terminals. Flat Plate low profile design

- Master BT type socket
- Screw terminals
- Ultralow profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 25mm

•Gross Weight0.19
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•The master socket contain a surge arrestor and an R/C circuit filter these are used by your service provider to get a fixed value resistance when they run line checks. Standard BT type socket with screw type terminals. Flat Plate low profile design

- Master BT type socket
- Screw terminals
- Ultralow profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 25mm

•Gross Weight0.19
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•The master socket contain a surge arrestor and an R/C circuit filter these are used by your service provider to get a fixed value resistance when they run line checks. Standard BT type socket with screw type terminals. Flat Plate low profile design

- Master BT type socket
- Screw terminals
- Ultralow profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 25mm

•Gross Weight0.19
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•The master socket contain a surge arrestor and an R/C circuit filter these are used by your service provider to get a fixed value resistance when they run line checks. Standard BT type socket with screw type terminals. Flat Plate low profile design

- Master BT type socket
- Screw terminals
- Ultralow profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 25mm

•Gross Weight0.19
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Ideal for TV/Coax and SAT TV/F-type connections (Isolated). Isolated outlets are for use with communal dishes and aerial installations. The isolated socket blocks interference from neighboring installs i.e. an apartment block. Flat Plate low profile design

- 1 x Coaxial TV outlet
- 1 x F-Type SAT TV Outlet
- Isolated
- Ultra low profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 25mm

•Gross Weight0.195
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Ideal for TV/Coax and SAT TV/F-type connections (Isolated). Isolated outlets are for use with communal dishes and aerial installations. The isolated socket blocks interference from neighboring installs i.e. an apartment block. Flat Plate low profile design

- 1 x Coaxial TV outlet
- 1 x F-Type SAT TV Outlet
- Isolated
- Ultra low profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 25mm

•Gross Weight0.195
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Ideal for TV/Coax and SAT TV/F-type connections (Isolated). Isolated outlets are for use with communal dishes and aerial installations. The isolated socket blocks interference from neighboring installs i.e. an apartment block. Flat Plate low profile design

- 1 x Coaxial TV outlet
- 1 x F-Type SAT TV Outlet
- Isolated
- Ultra low profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 25mm

•Gross Weight0.195
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Ideal for TV/Coax and SAT TV/F-type connections (Isolated). Isolated outlets are for use with communal dishes and aerial installations. The isolated socket blocks interference from neighboring installs i.e. an apartment block. Flat Plate low profile design

- 1 x Coaxial TV outlet
- 1 x F-Type SAT TV Outlet
- Isolated
- Ultra low profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 25mm

•Gross Weight0.195
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Ideal for TV/Coax and SAT TV/F-type connections (Isolated). Isolated outlets are for use with communal dishes and aerial installations. The isolated socket blocks interference from neighboring installs i.e. an apartment block. Flat Plate low profile design

- 1 x Coaxial TV outlet
- 1 x F-Type SAT TV Outlet
- Isolated
- Ultra low profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 25mm

•Gross Weight0.195
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Ideal for TV/Coax and SAT TV/F-type connections (Isolated). Isolated outlets are for use with communal dishes and aerial installations. The isolated socket blocks interference from neighboring installs i.e. an apartment block. Flat Plate low profile design

- 1 x Coaxial TV outlet
- 1 x F-Type SAT TV Outlet
- Isolated
- Ultra low profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 25mm

•Gross Weight0.195
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Compact pop up USB charging solution. Recess mounts into desks or works surfaces, includes plug in power supply. Ideal for workstations, office/home office and installing into suitable furniture to create a bespoke charging point.

- Pop Up action (push to pop up , push to close)
- Dual USB charger (5V DC 2.4A)
- Minimum mounting thickness 10mm
- Requires a cut out of 44mm
- Includes plug in power supply with 2m cable
- Supplied in Knightsbridge colour box

•Gross Weight0.235
•Diameter48
•Height
•Projection27.5
•Overall Height107
•Recessed Depth79.5
•Length
•Width / Depth
•Cut Out Diameter44
•MaterialPolycarbonate
•Colour of fittingBrushed Chrome
•Primary Voltage230
•IP RatingIP20
•Cable Length2000
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty1
•ConstructionPC
•IP RatingIP20

•IP54 rated pop up socket for use in kitchen counter tops, offices, boardrooms and hotel rooms. Wherever a discreet power solution is required. This device has a secure clip that locks the unit upright when in use, you can also close the unit with cables plugged in via its innovative cable management cap and inverted socket positions.

- IP54 rated
- 2 x 13A sockets with back lit on/off rocker at base
- Built in dual USB charger 5V DC 2.4A (shared) with on/off control
- Built in Bluetooth Speaker (2W RMS) with volume control and headphone port
- Fitted with 2m cable and BS plug top
- Aluminium casing with black top cap and chrome handle
- Minimum mounting board thickness: 10-50mm
- Cut out: 90-92mm (allowing a minimum 25mm clearance around the cut hole)
- Certified to BS 1363-2, BS 5733
- Supplied in a Knightsbridge box

WE RECOMMEND YOU ALWAYS USE CERTIFIED USB CABLES FOR SAFETY AND TO ENSURE COMPATIBILITY

•Gross Weight1.52
•Diameter101
•Height482
•Projection
•Overall Height
•Recessed Depth
•Length
•Width / Depth
•Cut Out Diameter90
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty1
•Constructionaluminium
•IP RatingIP54

•Ideal for creating wired networking points around the home. UTP CAT5e compliant RJ45 socket with IDC terminals. (IDC tool included) Made from high quality premium grade material Complete with integral gasket Compliant to all relevant British safety standard Minimum mounting depth: 35mm Dimensions: 88mm x 88mm Supplied in retail blister with full fitting instructions 15 year guarantee.

•Gross Weight0.1335
•Diameter
•Height88
•Projection7.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth88
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Ideal for creating wired networking points around the home. Rounded edge metal design

- Single shuttered UTP CAT5e RJ45 port
- IDC terminals (tool included)
- Write on designation label
- Rounded edge design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 35mm

•Gross Weight0.1195
•Diameter
•Height86
•Projection7.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth86
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Ideal for creating wired networking points around the home. Square edge metal design

- Single shuttered UTP CAT5e RJ45 port
- IDC terminals (tool included)
- Write on designation label
- Square edge design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 35mm

•Gross Weight0.153
•Diameter
•Height89
•Projection10.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth89
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Ideal for standard SAT TV/F-type connections (non-isolated). Non-isolated outlets are the standard type for domestic installations. This version must be used for satellite installations as a two way signal is required. The satellite box does not only receive signals it also sends a signal back to the satellite dish. Made from high quality premium grade material. Complete with integral gasket. Compliant to all relevant British safety standards. Minimum mounting depth: 25mm. Dimensions: 88mm x 88mm. Supplied in retail blister with full fitting instructions. 15 year guarantee.

•Gross Weight0.1355
•Diameter
•Height88
•Projection7.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth88
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Ideal for standard SAT TV/F-type connections (non-isolated). Non-isolated outlets are the standard type for domestic installations. This version must be used for satellite installations as a two way signal is required. The satellite box does not only receive signals it also sends a signal back to the satellite dish. Rounded edge metal design

- 1 x F-Type SAT TV Outlet
- Non-isolated
- Rounded edge design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 25mm

•Gross Weight0.1175
•Diameter
•Height86
•Projection7.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth86
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Ideal for standard SAT TV/F-type connections (non-isolated). Non-isolated outlets are the standard type for domestic installations. This version must be used for satellite installations as a two way signal is required. The satellite box does not only receive signals it also sends a signal back to the satellite dish. Square edge metal design

- 1 x F-Type SAT TV Outlet
- Non-isolated
- Square edge design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 25mm

•Gross Weight0.152
•Diameter
•Height89
•Projection10.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth89
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, flawless Screwless low profile metal design with matching metal rocker.
10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
- 10AX rated
- Screwless low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.181
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length
•Width / Depth
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, flawless Screwless low profile metal design with matching metal rocker.
10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
- 10AX rated
- Screwless low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.181
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length
•Width / Depth
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty5
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, flawless Screwless low profile metal design with matching metal rocker.
10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
- 10AX rated
- Screwless low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.164
•Diameter
•Height87.5
•Projection4.3
•Overall Height
•Recessed Depth
•Length
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, flawless Screwless low profile metal design with contrasting metal rocker.
10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
- 10AX rated
- Screwless low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.181
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length
•Width / Depth
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, flawless Screwless low profile metal design with matching metal rocker.
10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
- 10AX rated
- Screwless low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.164
•Diameter
•Height87.5
•Projection4.3
•Overall Height
•Recessed Depth
•Length
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, flawless Screwless low profile metal design with matching metal rocker.
10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
- 10AX rated
- Screwless low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.181
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length
•Width / Depth
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, flawless Screwless low profile metal design with matching metal rocker.
10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
- 10AX rated
- Screwless low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.181
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length
•Width / Depth
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty
•Constructionpremium grade steel
•IP RatingIP20

•2 way toggle switches are generally used when there are two switches controlling one light. A typical example of this is when a room has two entrances (like a through lounge) where there is a switch positioned at either entrance.

Made from high quality ultra slim, premium grade material
Complete with integral gasket for moisture protection
Minimum mounting depth: 16mm
Dimensions: 87.5mm x 87.5mm
Supplied in retail blister with full fitting instructions
Compliant to BS EN 60669-1
15 year guarantee.

•Gross Weight0.21
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•2 way toggle switches are generally used when there are two switches controlling one light. A typical example of this is when a room has two entrances (like a through lounge) where there is a switch positioned at either entrance.

Made from high quality ultra slim, premium grade material
Complete with integral gasket for moisture protection
Minimum mounting depth: 16mm
Dimensions: 87.5mm x 87.5mm
Supplied in retail blister with full fitting instructions
Compliant to BS EN 60669-1
15 year guarantee.

•Gross Weight0.21
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•2 way toggle switches are generally used when there are two switches controlling one light. A typical example of this is when a room has two entrances (like a through lounge) where there is a switch positioned at either entrance.

Made from high quality ultra slim, premium grade material
Complete with integral gasket for moisture protection
Minimum mounting depth: 16mm
Dimensions: 87.5mm x 87.5mm
Supplied in retail blister with full fitting instructions
Compliant to BS EN 60669-1
15 year guarantee.

•Gross Weight0.21
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•2 way toggle switches are generally used when there are two switches controlling one light. A typical example of this is when a room has two entrances (like a through lounge) where there is a switch positioned at either entrance.

Made from high quality ultra slim, premium grade material
Complete with integral gasket for moisture protection
Minimum mounting depth: 16mm
Dimensions: 87.5mm x 87.5mm
Supplied in retail blister with full fitting instructions
Compliant to BS EN 60669-1
15 year guarantee.

•Gross Weight0.21
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•2 way toggle switches are generally used when there are two switches controlling one light. A typical example of this is when a room has two entrances (like a through lounge) where there is a switch positioned at either entrance.

Made from high quality ultra slim, premium grade material
Complete with integral gasket for moisture protection
Minimum mounting depth: 16mm
Dimensions: 87.5mm x 87.5mm
Supplied in retail blister with full fitting instructions
Compliant to BS EN 60669-1
15 year guarantee.

•Gross Weight0.21
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20