0Items:
£0.00Total:
Ideal for creating wired networking points around the home. Flat Plate low profile design
- Single shuttered UTP CAT5e RJ45 port
- IDC terminals (tool included)
- Write on designation label
- Ultra low profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 35mm
https://static.mlaccessories.co.uk/file-download/117682/117682.pdf
Ideal for creating wired networking points around the home. Flat Plate low profile design
- Single shuttered UTP CAT5e RJ45 port
- IDC terminals (tool included)
- Write on designation label
- Ultra low profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 35mm
https://static.mlaccessories.co.uk/file-download/117684/117684.pdf
Under cabinet rectangular LED light, ideal for modern kitchens with built in diffuser
- Rectangular opal diffuser
- For use with 12V DC constant voltage driver - not included (ML product no. 12VDCA)
- Non-dimmable
- Max. 3 units per 12VDCA LED driver
- Pre-wired with 1.5m cable
4000K, Cool White, 90lm
https://static.mlaccessories.co.uk/file-download/116996/116996.pdf
•2 way toggle switches are generally used when there are two switches controlling one light. A typical example of this is when a room has two entrances (like a through lounge) where there is a switch positioned at either entrance.
Made from high quality ultra slim, premium grade material
Complete with integral gasket for moisture protection
Minimum mounting depth: 16mm
Dimensions: 87.5mm x 87.5mm
Supplied in retail blister with full fitting instructions
Compliant to BS EN 60669-1
15 year guarantee.
•Gross Weight0.21
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20
•An intermediate toggle switch is used when you have three switches controlling one light. A typical example of this is on a landing. There is a switch at the bottom of the stairs, one at top of the stairs and one at the end of the landing. On this circuit you would need the middle switch to be intermediate (i.e. the one at the top of the stairs) in order for all the switches to function properly.
Made from high quality ultra slim, premium grade material.
Complete with integral gasket.
Compliant to all relevant British safety standards.
Minimum mounting depth: 16mm.
Dimensions: 87.5mm x 87.5mm.
Supplied in retail blister with full fitting instructions.
15 year guarantee."
•Gross Weight0.21
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20
•2 way toggle switches are generally used when there are two switches controlling one light. A typical example of this is when a room has two entrances (like a through lounge) where there is a switch positioned at either entrance.
Made from high quality ultra slim, premium grade material
Complete with integral gasket for moisture protection
Minimum mounting depth: 16mm
Dimensions: 87.5mm x 87.5mm
Supplied in retail blister with full fitting instructions
Compliant to BS EN 60669-1
15 year guarantee.
•Gross Weight0.21
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20
•Perfect upgrade to any bathroom, dual voltage shaver socket, flawless Screwless low profile metal design.
- 115/230VAC 20VA
- IP41
- Dual Voltage Shaver Socket
- Screwless low profile design with built in gasket
- Certified to EN 61558
- Minimum mounting box depth: 47mm
•Gross Weight0.802
•Diameter
•Height148.5
•Projection4.3
•Overall Height
•Recessed Depth
•Length
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty
•Constructionpremium grade steel
•IP RatingIP41
•Perfect finishing touch to any modern home, flawless Screwless low profile metal design with matching metal rockers, unique socket insert design that is completely hidden once a plug is inserted.
- 13A 2G Switched Socket
- Double Pole Switches
- Fitted with twin earth terminals for use where compliance with BS 7671:2008 regulation 543-7 is required
- Screwless low profile design with built in gasket
- Certified to BS 1363:2
- Minimum mounting box depth 25mm
•Gross Weight0.33
•Diameter
•Height87.5
•Projection4.3
•Overall Height
•Recessed Depth
•Length
•Width / Depth14.85
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20
•This charger socket is a great finishing touch to any modern home. Screwless low profile metal design with matching metal rockers. Built in Dual USB Charger
- 13A Switched sockets
- Dual USB Charging 5V DC2.1A (shared)
- Screwless low profile design with built in gasket
- Certified to BS1363-2, EMC Certified and ErP Ready
- Minimum mounting box depth 25-35mm*
*dependent on wiring conditions
WE RECOMMEND YOU ALWAYS USE CERTIFIED USB CABLES FOR SAFETY AND TO ENSURE COMPATIBILITY
•Gross Weight0.36
•Diameter
•Height87.5
•Projection4.3
•Overall Height
•Recessed Depth
•Length
•Width / Depth148.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty3
•Constructionpremium grade steel
•IP RatingIP20
•This charger socket is a great finishing touch to any modern home. Screwless low profile metal design with matching metal rockers. Built in Dual USB Charger
- 13A Switched sockets
- Dual USB Charging 5V DC2.1A (shared)
- Screwless low profile design with built in gasket
- Certified to BS1363-2, EMC Certified and ErP Ready
- Minimum mounting box depth 25-35mm*
*dependent on wiring conditions
WE RECOMMEND YOU ALWAYS USE CERTIFIED USB CABLES FOR SAFETY AND TO ENSURE COMPATIBILITY
•Gross Weight0.36
•Diameter
•Height87.5
•Projection4.3
•Overall Height
•Recessed Depth
•Length
•Width / Depth148.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty3
•Constructionpremium grade steel
•IP RatingIP20
•This charger socket is a great finishing touch to any modern home. Screwless low profile metal design with matching metal rockers. Built in Dual USB Charger
- 13A Switched sockets
- Dual USB Charging 5V DC2.1A (shared)
- Screwless low profile design with built in gasket
- Certified to BS1363-2, EMC Certified and ErP Ready
- Minimum mounting box depth 25-35mm*
*dependent on wiring conditions
WE RECOMMEND YOU ALWAYS USE CERTIFIED USB CABLES FOR SAFETY AND TO ENSURE COMPATIBILITY
•Gross Weight0.36
•Diameter
•Height87.5
•Projection4.3
•Overall Height
•Recessed Depth
•Length
•Width / Depth148.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty3
•Constructionpremium grade steel
•IP RatingIP20
•Fused spur solution in flawless Screwless low profile metal design with matching fuse holder.
- 13A rated
- With neon indicator
- Screwless low profile design with built in gasket
- Certified to BS 1363-4
- Minimum mounting box depth 25mm
•Gross Weight0.1835
•Diameter
•Height87.5
•Projection4.3
•Overall Height
•Recessed Depth
•Length
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20
•2G 2 way leading edge dimmer with a 2 x 60-400W rating. With push on/ push off control. For controlling mains lighting add up the wattages of the bulbs you wish to dim. For low voltage lighting add up the rating of the transformers you wish to dim for compatibility. Made from high quality ultra slim, premium grade material. Complete with integral gasket. Compliant to all relevant British safety standards. Minimum mounting depth: 25mm. Dimensions: 87.5mm x 87.5mm. Supplied in retail blister with full fitting instructions. 15 year guarantee. Check with lamp manufacturer for compatibility.
•Gross Weight0.196
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length
•Width / Depth
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty
•Constructionpremium grade steel
•IP RatingIP20
•3G 2 way 40-400W rating. Suitable for resistive and capacitive loads. Push on/push off control. Advanced sensitivity leading edge type dimmer suitable for dimming all types of lamps both resistive and inductive. Minimum parallel capacity: 7W dimmable LED or 40W incandescence (or 0VA) Maximum parallel capacity: 100W dimmable LED or 400W incandescence (or 400VA) or purely resistive load. Suitable for mains lighting, low voltage lighting and LED lighting (for compatibility please check with lamp manufacturer). Made from high quality ultra slim, premium grade material, complete with integral gasket for moisture protection. Minimum mounting depth: 25mm. Dimensions: 148.5mm x 87.5mm Supplied in retail blister with full fitting instructions. Compliant to BS EN 60669-1, BS EN 60669-2. 3 year guarantee.
•Gross Weight0.452
•Diameter
•Height87.5
•Projection4.3
•Overall Height
•Recessed Depth
•Length
•Width / Depth148.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty3
•Constructionpremium grade steel
•IP RatingIP20
•3G 2 way 40-400W rating. Suitable for resistive and capacitive loads. Push on/push off control. Advanced sensitivity leading edge type dimmer suitable for dimming all types of lamps both resistive and inductive. Minimum parallel capacity: 7W dimmable LED or 40W incandescence (or 0VA) Maximum parallel capacity: 100W dimmable LED or 400W incandescence (or 400VA) or purely resistive load. Suitable for mains lighting, low voltage lighting and LED lighting (for compatibility please check with lamp manufacturer). Made from high quality ultra slim, premium grade material, complete with integral gasket for moisture protection. Minimum mounting depth: 25mm. Dimensions: 148.5mm x 87.5mm Supplied in retail blister with full fitting instructions. Compliant to BS EN 60669-1, BS EN 60669-2. 3 year guarantee.
•Gross Weight0.452
•Diameter
•Height87.5
•Projection4.3
•Overall Height
•Recessed Depth
•Length
•Width / Depth148.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty3
•Constructionpremium grade steel
•IP RatingIP20
•3G 2 way leading edge dimmer with a 3 x 60-400W rating. With push on/ push off control. For controlling mains lighting add up the wattages of the bulbs you wish to dim. For low voltage lighting add up the rating of the transformers you wish to dim for compatibility. Made from high quality ultra slim, premium grade material. Complete with integral gasket. Compliant to all relevant British safety standards. Minimum mounting depth: 25mm. Dimensions: 148.5mm x 87.5mm. Supplied in retail blister with full fitting instructions. 15 year guarantee. Check with lamp manufacturer for compatibility.
•Gross Weight0.33
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length
•Width / Depth
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty
•Constructionpremium grade steel
•IP RatingIP20
•Cooker control units enable isolation of the unit so that maintenance and repairs to be carried out separately. The unit can be switched off, preventing the appliance from being turned on accidentally - for example whilst cleaning. Control two or more cooking appliances in the same room, providing rating is sufficient. This model combines a 45A switch with a 13A socket. Flawless Screwless design.
- 45A
- Double pole
- With neon indicators
- 13A switched socket
- Screwless low profile design with built in gasket
- Certified to BS 4177, BS 1363-2
- Minimum mounting box depth: 47mm
•Gross Weight0.358
•Diameter
•Height87.5
•Projection4.3
•Overall Height
•Recessed Depth
•Length
•Width / Depth148.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20
•4G 2 way 40-400W rating. Suitable for resistive and capacitive loads. Push on/push off control. Advanced sensitivity leading edge type dimmer suitable for dimming all types of lamps both resistive and inductive. Minimum parallel capacity: 7W dimmable LED or 40W incandescence (or 0VA) Maximum parallel capacity: 100W dimmable LED or 400W incandescence (or 400VA) or purely resistive load. Suitable for mains lighting, low voltage lighting and LED lighting (for compatibility please check with lamp manufacturer). Made from high quality ultra slim, premium grade material, complete with integral gasket for moisture protection. Minimum mounting depth: 25mm. Dimensions: 148.5mm x 87.5mm Supplied in retail blister with full fitting instructions. Compliant to BS EN 60669-1, BS EN 60669-2. 3 year guarantee.
•Gross Weight0.496
•Diameter
•Height87.5
•Projection4.3
•Overall Height
•Recessed Depth
•Length
•Width / Depth148.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty3
•Constructionpremium grade steel
•IP RatingIP20
•4G 2 way 40-400W rating. Suitable for resistive and capacitive loads. Push on/push off control. Advanced sensitivity leading edge type dimmer suitable for dimming all types of lamps both resistive and inductive. Minimum parallel capacity: 7W dimmable LED or 40W incandescence (or 0VA) Maximum parallel capacity: 100W dimmable LED or 400W incandescence (or 400VA) or purely resistive load. Suitable for mains lighting, low voltage lighting and LED lighting (for compatibility please check with lamp manufacturer). Made from high quality ultra slim, premium grade material, complete with integral gasket for moisture protection. Minimum mounting depth: 25mm. Dimensions: 148.5mm x 87.5mm Supplied in retail blister with full fitting instructions. Compliant to BS EN 60669-1, BS EN 60669-2. 3 year guarantee.
•Gross Weight0.496
•Diameter
•Height87.5
•Projection4.3
•Overall Height
•Recessed Depth
•Length
•Width / Depth148.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty3
•Constructionpremium grade steel
•IP RatingIP20
•4G 2 way leading edge dimmer with a 4 x 60-400W rating. With push on/ push off control. For controlling mains lighting add up the wattages of the bulbs you wish to dim. For low voltage lighting add up the rating of the transformers you wish to dim for compatibility. Made from high quality ultra slim, premium grade material. Complete with integral gasket. Compliant to all relevant British safety standards. Minimum mounting depth: 25mm. Dimensions: 148.5mm x 87.5mm. Supplied in retail blister with full fitting instructions. 15 year guarantee. Check with lamp manufacturer for compatibility.
•Gross Weight0.448
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length
•Width / Depth
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty
•Constructionpremium grade steel
•IP RatingIP20
•4G 2 way leading edge dimmer with a 4 x 60-400W rating. With push on/ push off control. For controlling mains lighting add up the wattages of the bulbs you wish to dim. For low voltage lighting add up the rating of the transformers you wish to dim for compatibility. Made from high quality ultra slim, premium grade material. Complete with integral gasket. Compliant to all relevant British safety standards. Minimum mounting depth: 25mm. Dimensions: 148.5mm x 87.5mm. Supplied in retail blister with full fitting instructions. 15 year guarantee. Check with lamp manufacturer for compatibility.
•Gross Weight0.33
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length
•Width / Depth
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty
•Constructionpremium grade steel
•IP RatingIP20
•Ideal for use in custom lighting solutions, flawless Screwless low profile metal design.
- 5A round pin socket
- Unswitched
- Screwless low profile design with built in gasket
- Certified to BS 546
- Minimum mounting box depth 25mm
•Gross Weight0.181
•Diameter
•Height87.5
•Projection
•Overall Height
•Recessed Depth
•Length
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20
Ideal for standard TV/Coax connections (non-isolated). Flawless Screwless design
- Coaxial TV outlet
- Non-isolated
- Screwless low profile design with built in gasket
- Certified to BS5733
- Minimum mounting box depth: 25mm
https://static.mlaccessories.co.uk/file-download/115342/115342.pdf
Ideal for standard TV/Coax connections (non-isolated). Flawless Screwless design
- Coaxial TV outlet
- Non-isolated
- Screwless low profile design with built in gasket
- Certified to BS5733
- Minimum mounting box depth: 25mm
https://static.mlaccessories.co.uk/file-download/115340/115340.pdf
Ideal for standard TV/Coax connections (non-isolated). Flawless Screwless design
- Coaxial TV outlet
- Non-isolated
- Screwless low profile design with built in gasket
- Certified to BS5733
- Minimum mounting box depth: 25mm
https://static.mlaccessories.co.uk/file-download/115338/115338.pdf
Ideal for standard TV/Coax connections (non-isolated). Flawless Screwless design
- Coaxial TV outlet
- Non-isolated
- Screwless low profile design with built in gasket
- Certified to BS5733
- Minimum mounting box depth: 25mm
https://static.mlaccessories.co.uk/file-download/129438/129438.pdf
Ideal for standard TV/Coax connections (non-isolated). Flawless Screwless design
- Coaxial TV outlet
- Non-isolated
- Screwless low profile design with built in gasket
- Certified to BS5733
- Minimum mounting box depth: 25mm
https://static.mlaccessories.co.uk/file-download/115336/115336.pdf
Ideal for standard TV/Coax connections (non-isolated). Flawless Screwless design
- Coaxial TV outlet
- Non-isolated
- Screwless low profile design with built in gasket
- Certified to BS5733
- Minimum mounting box depth: 25mm
https://static.mlaccessories.co.uk/file-download/115334/115334.pdf
Ideal for TV/Coax and SAT TV/F-type connections (Isolated). Isolated outlets are for use with communal dishes and aerial installations. The isolated socket blocks interference from neighboring installs i.e. an apartment block. Flawless Screwless design
- 1 x Coaxial TV outlet
- 1 x F-Type SAT TV Outlet
- Isolated
- Screwless low profile design with built in gasket
- Certified to BS5733
- Minimum mounting box depth: 25mm
https://static.mlaccessories.co.uk/file-download/115752/115752.pdf
Ideal for TV/Coax and SAT TV/F-type connections (Isolated). Isolated outlets are for use with communal dishes and aerial installations. The isolated socket blocks interference from neighboring installs i.e. an apartment block. Flawless Screwless design
- 1 x Coaxial TV outlet
- 1 x F-Type SAT TV Outlet
- Isolated
- Screwless low profile design with built in gasket
- Certified to BS5733
- Minimum mounting box depth: 25mm
https://static.mlaccessories.co.uk/file-download/115754/115754.pdf
Ideal for TV/Coax and SAT TV/F-type connections (Isolated). Isolated outlets are for use with communal dishes and aerial installations. The isolated socket blocks interference from neighboring installs i.e. an apartment block. Flawless Screwless design
- 1 x Coaxial TV outlet
- 1 x F-Type SAT TV Outlet
- Isolated
- Screwless low profile design with built in gasket
- Certified to BS5733
- Minimum mounting box depth: 25mm
https://static.mlaccessories.co.uk/file-download/115756/115756.pdf
Ideal for TV/Coax and SAT TV/F-type connections (Isolated). Isolated outlets are for use with communal dishes and aerial installations. The isolated socket blocks interference from neighboring installs i.e. an apartment block. Flawless Screwless design
- 1 x Coaxial TV outlet
- 1 x F-Type SAT TV Outlet
- Isolated
- Screwless low profile design with built in gasket
- Certified to BS5733
- Minimum mounting box depth: 25mm
https://static.mlaccessories.co.uk/file-download/129440/129440.pdf
Ideal for TV/Coax and SAT TV/F-type connections (Isolated). Isolated outlets are for use with communal dishes and aerial installations. The isolated socket blocks interference from neighboring installs i.e. an apartment block. Flawless Screwless design
- 1 x Coaxial TV outlet
- 1 x F-Type SAT TV Outlet
- Isolated
- Screwless low profile design with built in gasket
- Certified to BS5733
- Minimum mounting box depth: 25mm
https://static.mlaccessories.co.uk/file-download/115758/115758.pdf
Ideal for TV/Coax and SAT TV/F-type connections (Isolated). Isolated outlets are for use with communal dishes and aerial installations. The isolated socket blocks interference from neighboring installs i.e. an apartment block. Flawless Screwless design
- 1 x Coaxial TV outlet
- 1 x F-Type SAT TV Outlet
- Isolated
- Screwless low profile design with built in gasket
- Certified to BS5733
- Minimum mounting box depth: 25mm
https://static.mlaccessories.co.uk/file-download/115760/115760.pdf
Ideal for standard SAT TV/F-type connections (non-isolated). Non-isolated outlets are the standard type for domestic installations. This version must be used for satellite installations as a two way signal is required. The satellite box does not only receive signals it also sends a signal back to the satellite dish. Flawless Screwless design
- 1 x F-Type SAT TV Outlet
- Non-isolated
- Screwless low profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 25mm
https://static.mlaccessories.co.uk/file-download/115762/115762.pdf
Ideal for standard SAT TV/F-type connections (non-isolated). Non-isolated outlets are the standard type for domestic installations. This version must be used for satellite installations as a two way signal is required. The satellite box does not only receive signals it also sends a signal back to the satellite dish. Flawless Screwless design
- 1 x F-Type SAT TV Outlet
- Non-isolated
- Screwless low profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 25mm
https://static.mlaccessories.co.uk/file-download/115764/115764.pdf
Ideal for standard SAT TV/F-type connections (non-isolated). Non-isolated outlets are the standard type for domestic installations. This version must be used for satellite installations as a two way signal is required. The satellite box does not only receive signals it also sends a signal back to the satellite dish. Flawless Screwless design
- 1 x F-Type SAT TV Outlet
- Non-isolated
- Screwless low profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 25mm
https://static.mlaccessories.co.uk/file-download/115766/115766.pdf
Ideal for standard SAT TV/F-type connections (non-isolated). Non-isolated outlets are the standard type for domestic installations. This version must be used for satellite installations as a two way signal is required. The satellite box does not only receive signals it also sends a signal back to the satellite dish. Flawless Screwless design
- 1 x F-Type SAT TV Outlet
- Non-isolated
- Screwless low profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 25mm
https://static.mlaccessories.co.uk/file-download/129442/129442.pdf
Ideal for standard SAT TV/F-type connections (non-isolated). Non-isolated outlets are the standard type for domestic installations. This version must be used for satellite installations as a two way signal is required. The satellite box does not only receive signals it also sends a signal back to the satellite dish. Flawless Screwless design
- 1 x F-Type SAT TV Outlet
- Non-isolated
- Screwless low profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 25mm
https://static.mlaccessories.co.uk/file-download/115768/115768.pdf
Ideal for standard SAT TV/F-type connections (non-isolated). Non-isolated outlets are the standard type for domestic installations. This version must be used for satellite installations as a two way signal is required. The satellite box does not only receive signals it also sends a signal back to the satellite dish. Flawless Screwless design
- 1 x F-Type SAT TV Outlet
- Non-isolated
- Screwless low profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 25mm
https://static.mlaccessories.co.uk/file-download/115770/115770.pdf
Cranbrook Electrics - established 1973. Based in Loughton, Essex we have been supplying the public as well as trade with lighting and electrical goods for over 25 years.
Dealing directly with many manufacturers and with contacts elsewhere we are confident in supplying all your needs.
Just a few of the brands we ared able to supply to you at competitive prices - BG, MK, Astro lighting, Searchlight, Endon, Dar, Axiom, Integral LED, Bell Lighting and many more.
For all your electrical wiring, cable, switches and sockets visit our showroom. Further Discounts Apply in Store*
Secure online ordering
© 2021 Cranbrook Electrics