Decorative

•4G 2 way 40-400W rating. With push on/ push off control. Suitable for resistive and capacitive loads. Push on/push off control. Advanced sensitivity leading edge type dimmer suitable for dimming all types of lamps both resistive and inductive. Minimum parallel capacity: 7W dimmable LED or 40W incandescence (or 0VA) Maximum parallel capacity: 100W dimmable LED or 400W incandescence (or 400VA) or purely resistive load. Suitable for mains lighting, low voltage lighting and LED lighting (for compatibility please check with lamp manufacturer). Made from high quality ultra slim, premium grade material, complete with integral gasket for moisture protection. Minimum mounting depth: 25mm. Dimensions: 148.5mm x 87.5mm Supplied in retail blister with full fitting instructions. Compliant to BS EN 60669-1, BS EN 60669-2. 3 year guarantee.

•Gross Weight0.52
•Diameter
•Height87.5
•Projection
•Overall Height
•Recessed Depth
•Length
•Width / Depth148.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty3
•Constructionpremium grade steel
•IP RatingIP20

•4G 2 way 40-400W rating. With push on/ push off control. Suitable for resistive and capacitive loads. Push on/push off control. Advanced sensitivity leading edge type dimmer suitable for dimming all types of lamps both resistive and inductive. Minimum parallel capacity: 7W dimmable LED or 40W incandescence (or 0VA) Maximum parallel capacity: 100W dimmable LED or 400W incandescence (or 400VA) or purely resistive load. Suitable for mains lighting, low voltage lighting and LED lighting (for compatibility please check with lamp manufacturer). Made from high quality ultra slim, premium grade material, complete with integral gasket for moisture protection. Minimum mounting depth: 25mm. Dimensions: 148.5mm x 87.5mm Supplied in retail blister with full fitting instructions. Compliant to BS EN 60669-1, BS EN 60669-2. 3 year guarantee.

•Gross Weight0.52
•Diameter
•Height87.5
•Projection
•Overall Height
•Recessed Depth
•Length
•Width / Depth148.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty3
•Constructionpremium grade steel
•IP RatingIP20

•4G 2 way 40-400W rating. With push on/ push off control. Suitable for resistive and capacitive loads. Push on/push off control. Advanced sensitivity leading edge type dimmer suitable for dimming all types of lamps both resistive and inductive. Minimum parallel capacity: 7W dimmable LED or 40W incandescence (or 0VA) Maximum parallel capacity: 100W dimmable LED or 400W incandescence (or 400VA) or purely resistive load. Suitable for mains lighting, low voltage lighting and LED lighting (for compatibility please check with lamp manufacturer). Made from high quality ultra slim, premium grade material, complete with integral gasket for moisture protection. Minimum mounting depth: 25mm. Dimensions: 148.5mm x 87.5mm Supplied in retail blister with full fitting instructions. Compliant to BS EN 60669-1, BS EN 60669-2. 3 year guarantee.

•Gross Weight0.52
•Diameter
•Height87.5
•Projection
•Overall Height
•Recessed Depth
•Length
•Width / Depth148.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty3
•Constructionpremium grade steel
•IP RatingIP20

•4G 2 way 40-400W rating. With push on/ push off control. Suitable for resistive and capacitive loads. Push on/push off control. Advanced sensitivity leading edge type dimmer suitable for dimming all types of lamps both resistive and inductive. Minimum parallel capacity: 7W dimmable LED or 40W incandescence (or 0VA) Maximum parallel capacity: 100W dimmable LED or 400W incandescence (or 400VA) or purely resistive load. Suitable for mains lighting, low voltage lighting and LED lighting (for compatibility please check with lamp manufacturer). Made from high quality ultra slim, premium grade material, complete with integral gasket for moisture protection. Minimum mounting depth: 25mm. Dimensions: 148.5mm x 87.5mm Supplied in retail blister with full fitting instructions. Compliant to BS EN 60669-1, BS EN 60669-2. 3 year guarantee.

•Gross Weight0.52
•Diameter
•Height87.5
•Projection
•Overall Height
•Recessed Depth
•Length
•Width / Depth148.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty3
•Constructionpremium grade steel
•IP RatingIP20

•4G 2 way leading edge dimmer with a 4 x 60-400W rating. With push on/ push off control. For controlling mains lighting add up the wattages of the bulbs you wish to dim. For low voltage lighting add up the rating of the transformers you wish to dim for compatibility. Made from high quality ultra slim, premium grade material, complete with integral gasket for moisture protection. Minimum mounting depth: 25mm. Dimensions: 148.5mm x 87.5mm Supplied in retail blister with full fitting instructions. Compliant to BS EN 60669-1, BS EN 60669-2. 15 year guarantee. Check with lamp manufacturer for compatibility.

•Gross Weight0.52
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length148.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•4G 2 way leading edge dimmer with a 4 x 60-400W rating. With push on/ push off control. For controlling mains lighting add up the wattages of the bulbs you wish to dim. For low voltage lighting add up the rating of the transformers you wish to dim for compatibility. Made from high quality ultra slim, premium grade material, complete with integral gasket for moisture protection. Minimum mounting depth: 25mm. Dimensions: 148.5mm x 87.5mm Supplied in retail blister with full fitting instructions. Compliant to BS EN 60669-1, BS EN 60669-2. 15 year guarantee. Check with lamp manufacturer for compatibility.

•Gross Weight0.52
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length148.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•4G 2 way leading edge dimmer with a 4 x 60-400W rating. With push on/ push off control. For controlling mains lighting add up the wattages of the bulbs you wish to dim. For low voltage lighting add up the rating of the transformers you wish to dim for compatibility. Made from high quality ultra slim, premium grade material, complete with integral gasket for moisture protection. Minimum mounting depth: 25mm. Dimensions: 148.5mm x 87.5mm Supplied in retail blister with full fitting instructions. Compliant to BS EN 60669-1, BS EN 60669-2. 15 year guarantee. Check with lamp manufacturer for compatibility.

•Gross Weight0.52
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length148.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•4G 2 way leading edge dimmer with a 4 x 60-400W rating. With push on/ push off control. For controlling mains lighting add up the wattages of the bulbs you wish to dim. For low voltage lighting add up the rating of the transformers you wish to dim for compatibility. Made from high quality ultra slim, premium grade material, complete with integral gasket for moisture protection. Minimum mounting depth: 25mm. Dimensions: 148.5mm x 87.5mm Supplied in retail blister with full fitting instructions. Compliant to BS EN 60669-1, BS EN 60669-2. 15 year guarantee. Check with lamp manufacturer for compatibility.

•Gross Weight0.52
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length148.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•4G 2 way leading edge dimmer with a 4 x 60-400W rating. With push on/ push off control. For controlling mains lighting add up the wattages of the bulbs you wish to dim. For low voltage lighting add up the rating of the transformers you wish to dim for compatibility. Made from high quality ultra slim, premium grade material, complete with integral gasket for moisture protection. Minimum mounting depth: 25mm. Dimensions: 148.5mm x 87.5mm Supplied in retail blister with full fitting instructions. Compliant to BS EN 60669-1, BS EN 60669-2. 15 year guarantee. Check with lamp manufacturer for compatibility.

•Gross Weight0.52
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length148.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Ideal for use in custom lighting solutions, Flat Plate low profile metal design.

- 5A round pin socket
- Unswitched
- Ultra low profile design with built in gasket
- Certified to BS 546
- Minimum mounting box depth 25mm

•Gross Weight0.19
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Ideal for use in custom lighting solutions, Flat Plate low profile metal design.

- 5A round pin socket
- Unswitched
- Ultra low profile design with built in gasket
- Certified to BS 546
- Minimum mounting box depth 25mm

•Gross Weight0.19
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Ideal for use in custom lighting solutions, Flat Plate low profile metal design.

- 5A round pin socket
- Unswitched
- Ultra low profile design with built in gasket
- Certified to BS 546
- Minimum mounting box depth 25mm

•Gross Weight0.19
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Ideal for use in custom lighting solutions, Flat Plate low profile metal design.

- 5A round pin socket
- Unswitched
- Ultra low profile design with built in gasket
- Certified to BS 546
- Minimum mounting box depth 25mm

•Gross Weight0.19
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Ideal for creating wired networking points around the home. Flat Plate low profile design

- Single shuttered UTP CAT5e RJ45 port
- IDC terminals (tool included)
- Write on designation label
- Ultra low profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 35mm

•Gross Weight0.2
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Ideal for creating wired networking points around the home. Flat Plate low profile design

- Single shuttered UTP CAT5e RJ45 port
- IDC terminals (tool included)
- Write on designation label
- Ultra low profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 35mm

•Gross Weight0.2
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Ideal for creating wired networking points around the home. Flat Plate low profile design

- Single shuttered UTP CAT5e RJ45 port
- IDC terminals (tool included)
- Write on designation label
- Ultra low profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 35mm

•Gross Weight0.2
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Ideal for creating wired networking points around the home. Flat Plate low profile design

- Single shuttered UTP CAT5e RJ45 port
- IDC terminals (tool included)
- Write on designation label
- Ultra low profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 35mm

•Gross Weight0.2
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Ideal for creating wired networking points around the home. Flat Plate low profile design

- Single shuttered UTP CAT5e RJ45 port
- IDC terminals (tool included)
- Write on designation label
- Ultra low profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 35mm

•Gross Weight0.2
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Ideal for creating wired networking points around the home. Flat Plate low profile design

- Single shuttered UTP CAT5e RJ45 port
- IDC terminals (tool included)
- Write on designation label
- Ultra low profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 35mm

•Gross Weight0.2
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Ideal for TV & FM/DAB coaxial connections. Screened diplexer enables the signal from one cable to be used for both Digital TV reception and FM DAB reception. Flat Plate low profile design

- 1 x Coaxial TV outlet (female)
- 1 x Coaxial FM/DAB outlet (male)
- Screened
- Ultra low profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 35mm

•Gross Weight0.248
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Ideal for TV & FM/DAB coaxial connections. Screened diplexer enables the signal from one cable to be used for both Digital TV reception and FM DAB reception. Flat Plate low profile design

- 1 x Coaxial TV outlet (female)
- 1 x Coaxial FM/DAB outlet (male)
- Screened
- Ultra low profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 35mm

•Gross Weight0.248
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Ideal for TV & FM/DAB coaxial connections. Screened diplexer enables the signal from one cable to be used for both Digital TV reception and FM DAB reception. Flat Plate low profile design

- 1 x Coaxial TV outlet (female)
- 1 x Coaxial FM/DAB outlet (male)
- Screened
- Ultra low profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 35mm

•Gross Weight0.248
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Ideal for TV & FM/DAB coaxial connections. Screened diplexer enables the signal from one cable to be used for both Digital TV reception and FM DAB reception. Flat Plate low profile design

- 1 x Coaxial TV outlet (female)
- 1 x Coaxial FM/DAB outlet (male)
- Screened
- Ultra low profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 35mm

•Gross Weight0.248
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Ideal for TV & FM/DAB coaxial connections. Screened diplexer enables the signal from one cable to be used for both Digital TV reception and FM DAB reception. Flat Plate low profile design

- 1 x Coaxial TV outlet (female)
- 1 x Coaxial FM/DAB outlet (male)
- Screened
- Ultra low profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 35mm

•Gross Weight0.248
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Ideal for TV & FM/DAB coaxial connections. Screened diplexer enables the signal from one cable to be used for both Digital TV reception and FM DAB reception. Flat Plate low profile design

- 1 x Coaxial TV outlet (female)
- 1 x Coaxial FM/DAB outlet (male)
- Screened
- Ultra low profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 35mm

•Gross Weight0.248
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Secondary or extension telephone socket are used to run additional points of the original master socket. Standard BT type socket with screw type terminals. Flat Plate low profile design

- Extension BT type socket
- Screw terminals
- Ultra low profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 25mm

•Gross Weight0.19
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Secondary or extension telephone socket are used to run additional points of the original master socket. Standard BT type socket with screw type terminals. Flat Plate low profile design

- Extension BT type socket
- Screw terminals
- Ultra low profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 25mm

•Gross Weight0.19
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Secondary or extension telephone socket are used to run additional points of the original master socket. Standard BT type socket with screw type terminals. Flat Plate low profile design

- Extension BT type socket
- Screw terminals
- Ultra low profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 25mm

•Gross Weight0.19
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Secondary or extension telephone socket are used to run additional points of the original master socket. Standard BT type socket with screw type terminals. Flat Plate low profile design

- Extension BT type socket
- Screw terminals
- Ultra low profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 25mm

•Gross Weight0.19
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Secondary or extension telephone socket are used to run additional points of the original master socket. Standard BT type socket with screw type terminals. Flat Plate low profile design

- Extension BT type socket
- Screw terminals
- Ultra low profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 25mm

•Gross Weight0.19
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Secondary or extension telephone socket are used to run additional points of the original master socket. Standard BT type socket with screw type terminals. Flat Plate low profile design

- Extension BT type socket
- Screw terminals
- Ultra low profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 25mm

•Gross Weight0.19
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•The master socket contain a surge arrestor and an R/C circuit filter these are used by your service provider to get a fixed value resistance when they run line checks. Standard BT type socket with screw type terminals. Flat Plate low profile design

- Master BT type socket
- Screw terminals
- Ultralow profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 25mm

•Gross Weight0.19
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•The master socket contain a surge arrestor and an R/C circuit filter these are used by your service provider to get a fixed value resistance when they run line checks. Standard BT type socket with screw type terminals. Flat Plate low profile design

- Master BT type socket
- Screw terminals
- Ultralow profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 25mm

•Gross Weight0.19
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•The master socket contain a surge arrestor and an R/C circuit filter these are used by your service provider to get a fixed value resistance when they run line checks. Standard BT type socket with screw type terminals. Flat Plate low profile design

- Master BT type socket
- Screw terminals
- Ultralow profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 25mm

•Gross Weight0.19
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•The master socket contain a surge arrestor and an R/C circuit filter these are used by your service provider to get a fixed value resistance when they run line checks. Standard BT type socket with screw type terminals. Flat Plate low profile design

- Master BT type socket
- Screw terminals
- Ultralow profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 25mm

•Gross Weight0.19
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•The master socket contain a surge arrestor and an R/C circuit filter these are used by your service provider to get a fixed value resistance when they run line checks. Standard BT type socket with screw type terminals. Flat Plate low profile design

- Master BT type socket
- Screw terminals
- Ultralow profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 25mm

•Gross Weight0.19
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•The master socket contain a surge arrestor and an R/C circuit filter these are used by your service provider to get a fixed value resistance when they run line checks. Standard BT type socket with screw type terminals. Flat Plate low profile design

- Master BT type socket
- Screw terminals
- Ultralow profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 25mm

•Gross Weight0.19
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Ideal for TV/Coax and SAT TV/F-type connections (Isolated). Isolated outlets are for use with communal dishes and aerial installations. The isolated socket blocks interference from neighboring installs i.e. an apartment block. Flat Plate low profile design

- 1 x Coaxial TV outlet
- 1 x F-Type SAT TV Outlet
- Isolated
- Ultra low profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 25mm

•Gross Weight0.195
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Ideal for TV/Coax and SAT TV/F-type connections (Isolated). Isolated outlets are for use with communal dishes and aerial installations. The isolated socket blocks interference from neighboring installs i.e. an apartment block. Flat Plate low profile design

- 1 x Coaxial TV outlet
- 1 x F-Type SAT TV Outlet
- Isolated
- Ultra low profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 25mm

•Gross Weight0.195
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Ideal for TV/Coax and SAT TV/F-type connections (Isolated). Isolated outlets are for use with communal dishes and aerial installations. The isolated socket blocks interference from neighboring installs i.e. an apartment block. Flat Plate low profile design

- 1 x Coaxial TV outlet
- 1 x F-Type SAT TV Outlet
- Isolated
- Ultra low profile design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 25mm

•Gross Weight0.195
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20