Decorative

•Perfect finishing touch to any modern home, ultra-low profile Flat Plate metal design with matching metal toggle. 10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.

- 10AX rated
- Ultra-low profile Flat Plate design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.2
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•An intermediate switch is used when you have three switches controlling one light. A typical example of this is on a landing. There is a switch at the bottom of the stairs, one at top of the stairs and one at the end of the landing. On this circuit you would need the middle switch to be intermediate (i.e. the one at the top of the stairs) in order for all the switches to function properly. Flat Plate low profile metal design with matching metal rocker.

- 10AX rated
- Ultra low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.2
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•An intermediate switch is used when you have three switches controlling one light. A typical example of this is on a landing. There is a switch at the bottom of the stairs, one at top of the stairs and one at the end of the landing. On this circuit you would need the middle switch to be intermediate (i.e. the one at the top of the stairs) in order for all the switches to function properly. Flat Plate low profile metal design with matching metal rocker.

- 10AX rated
- Ultra low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.2
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•An intermediate switch is used when you have three switches controlling one light. A typical example of this is on a landing. There is a switch at the bottom of the stairs, one at top of the stairs and one at the end of the landing. On this circuit you would need the middle switch to be intermediate (i.e. the one at the top of the stairs) in order for all the switches to function properly. Flat Plate low profile metal design with matching metal rocker.

- 10AX rated
- Ultra low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.2
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•An intermediate switch is used when you have three switches controlling one light. A typical example of this is on a landing. There is a switch at the bottom of the stairs, one at top of the stairs and one at the end of the landing. On this circuit you would need the middle switch to be intermediate (i.e. the one at the top of the stairs) in order for all the switches to function properly. Flat Plate low profile metal design with matching metal rocker.

- 10AX rated
- Ultra low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.2
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•An intermediate switch is used when you have three switches controlling one light. A typical example of this is on a landing. There is a switch at the bottom of the stairs, one at top of the stairs and one at the end of the landing. On this circuit you would need the middle switch to be intermediate (i.e. the one at the top of the stairs) in order for all the switches to function properly. Flat Plate low profile metal design with matching metal rocker.

- 10AX rated
- Ultra low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.2
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•An intermediate switch is used when you have three switches controlling one light. A typical example of this is on a landing. There is a switch at the bottom of the stairs, one at top of the stairs and one at the end of the landing. On this circuit you would need the middle switch to be intermediate (i.e. the one at the top of the stairs) in order for all the switches to function properly. Flat Plate low profile metal design with matching metal rocker.

- 10AX rated
- Ultra low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.2
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•An intermediate switch is used when you have three switches controlling one light. A typical example of this is on a landing. There is a switch at the bottom of the stairs, one at top of the stairs and one at the end of the landing. On this circuit you would need the middle switch to be intermediate (i.e. the one at the top of the stairs) in order for all the switches to function properly. Flat Plate low profile metal design with matching metal toggle.

- 10AX rated
- Ultra low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.21
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•An intermediate switch is used when you have three switches controlling one light. A typical example of this is on a landing. There is a switch at the bottom of the stairs, one at top of the stairs and one at the end of the landing. On this circuit you would need the middle switch to be intermediate (i.e. the one at the top of the stairs) in order for all the switches to function properly. Flat Plate low profile metal design with matching metal toggle.

- 10AX rated
- Ultra low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.21
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•An intermediate switch is used when you have three switches controlling one light. A typical example of this is on a landing. There is a switch at the bottom of the stairs, one at top of the stairs and one at the end of the landing. On this circuit you would need the middle switch to be intermediate (i.e. the one at the top of the stairs) in order for all the switches to function properly. Flat Plate low profile metal design with matching metal toggle.

- 10AX rated
- Ultra low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.21
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•An intermediate switch is used when you have three switches controlling one light. A typical example of this is on a landing. There is a switch at the bottom of the stairs, one at top of the stairs and one at the end of the landing. On this circuit you would need the middle switch to be intermediate (i.e. the one at the top of the stairs) in order for all the switches to function properly. Flat Plate low profile metal design with matching metal toggle.

- 10AX rated
- Ultra low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.21
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•An intermediate switch is used when you have three switches controlling one light. A typical example of this is on a landing. There is a switch at the bottom of the stairs, one at top of the stairs and one at the end of the landing. On this circuit you would need the middle switch to be intermediate (i.e. the one at the top of the stairs) in order for all the switches to function properly. Flat Plate low profile metal design with matching metal toggle.

- 10AX rated
- Ultra low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.21
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•An intermediate switch is used when you have three switches controlling one light. A typical example of this is on a landing. There is a switch at the bottom of the stairs, one at top of the stairs and one at the end of the landing. On this circuit you would need the middle switch to be intermediate (i.e. the one at the top of the stairs) in order for all the switches to function properly. Flat Plate low profile metal design with matching metal toggle.

- 10AX rated
- Ultra low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.21
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, ultra-low profile Flat Plate metal design with matching metal rocker.
10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
- 10AX rated
- Ultra-low profile Flat Plate design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.2
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, ultra-low profile Flat Plate metal design with matching metal rocker.
10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
- 10AX rated
- Ultra-low profile Flat Plate design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.2
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, ultra-low profile Flat Plate metal design with matching metal rocker.
10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
- 10AX rated
- Ultra-low profile Flat Plate design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.2
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, ultra-low profile Flat Plate metal design with matching metal rocker.
10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
- 10AX rated
- Ultra-low profile Flat Plate design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.2
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, ultra-low profile Flat Plate metal design with matching metal rocker.
10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
- 10AX rated
- Ultra-low profile Flat Plate design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.2
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, ultra-low profile Flat Plate metal design with matching metal rocker.
10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
- 10AX rated
- Ultra-low profile Flat Plate design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.2
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, ultra-low profile Flat Plate metal design with matching metal toggle. 10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.

- 10AX rated
- Ultra-low profile Flat Plate design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.22
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, ultra-low profile Flat Plate metal design with matching metal toggle. 10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.

- 10AX rated
- Ultra-low profile Flat Plate design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.22
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, ultra-low profile Flat Plate metal design with matching metal toggle. 10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.

- 10AX rated
- Ultra-low profile Flat Plate design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.22
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, ultra-low profile Flat Plate metal design with matching metal toggle. 10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.

- 10AX rated
- Ultra-low profile Flat Plate design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.22
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, ultra-low profile Flat Plate metal design with matching metal toggle. 10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.

- 10AX rated
- Ultra-low profile Flat Plate design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.22
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Ideal for providing a safe and simple method of isolating fan units in en-suite bathrooms, family bathrooms, utility rooms, store rooms etc. Often the fan unit will be wired into the lighting circuit for convenience and efficiency. With this kind of installation there is often a need to leave the lighting circuit live whilst isolating the fan for maintenance. Flat Plate low profile metal design with matching metal rocker.

- 10AX rated
- Triple Pole
- Ultra low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.2
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Ideal for providing a safe and simple method of isolating fan units in en-suite bathrooms, family bathrooms, utility rooms, store rooms etc. Often the fan unit will be wired into the lighting circuit for convenience and efficiency. With this kind of installation there is often a need to leave the lighting circuit live whilst isolating the fan for maintenance. Flat Plate low profile metal design with matching metal rocker.

- 10AX rated
- Triple Pole
- Ultra low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.2
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Ideal for providing a safe and simple method of isolating fan units in en-suite bathrooms, family bathrooms, utility rooms, store rooms etc. Often the fan unit will be wired into the lighting circuit for convenience and efficiency. With this kind of installation there is often a need to leave the lighting circuit live whilst isolating the fan for maintenance. Flat Plate low profile metal design with matching metal rocker.

- 10AX rated
- Triple Pole
- Ultra low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.2
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Ideal for providing a safe and simple method of isolating fan units in en-suite bathrooms, family bathrooms, utility rooms, store rooms etc. Often the fan unit will be wired into the lighting circuit for convenience and efficiency. With this kind of installation there is often a need to leave the lighting circuit live whilst isolating the fan for maintenance. Flat Plate low profile metal design with matching metal rocker.

- 10AX rated
- Triple Pole
- Ultra low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.2
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Ideal for providing a safe and simple method of isolating fan units in en-suite bathrooms, family bathrooms, utility rooms, store rooms etc. Often the fan unit will be wired into the lighting circuit for convenience and efficiency. With this kind of installation there is often a need to leave the lighting circuit live whilst isolating the fan for maintenance. Flat Plate low profile metal design with matching metal rocker.

- 10AX rated
- Triple Pole
- Ultra low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.2
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Ideal for providing a safe and simple method of isolating fan units in en-suite bathrooms, family bathrooms, utility rooms, store rooms etc. Often the fan unit will be wired into the lighting circuit for convenience and efficiency. With this kind of installation there is often a need to leave the lighting circuit live whilst isolating the fan for maintenance. Flat Plate low profile metal design with matching metal rocker.

- 10AX rated
- Triple Pole
- Ultra low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.2
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, ultra-low profile Flat Plate metal design with matching metal rocker.
10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
- 10AX rated
- Ultra-low profile Flat Plate design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.21
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, ultra-low profile Flat Plate metal design with matching metal rocker.
10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
- 10AX rated
- Ultra-low profile Flat Plate design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.21
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, ultra-low profile Flat Plate metal design with matching metal rocker.
10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
- 10AX rated
- Ultra-low profile Flat Plate design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.21
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, ultra-low profile Flat Plate metal design with matching metal rocker.
10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
- 10AX rated
- Ultra-low profile Flat Plate design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.21
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, ultra-low profile Flat Plate metal design with matching metal rocker.
10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
- 10AX rated
- Ultra-low profile Flat Plate design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.21
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, ultra-low profile Flat Plate metal design with matching metal rocker.
10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
- 10AX rated
- Ultra-low profile Flat Plate design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.21
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, ultra-low profile Flat Plate metal design with matching metal toggle. 10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.

- 10AX rated
- Ultra-low profile Flat Plate design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.33
•Diameter
•Height87.5
•Projection
•Overall Height
•Recessed Depth
•Length
•Width / Depth148.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, ultra-low profile Flat Plate metal design with matching metal toggle. 10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.

- 10AX rated
- Ultra-low profile Flat Plate design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.33
•Diameter
•Height87.5
•Projection
•Overall Height
•Recessed Depth
•Length
•Width / Depth148.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, ultra-low profile Flat Plate metal design with matching metal toggle. 10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.

- 10AX rated
- Ultra-low profile Flat Plate design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.33
•Diameter
•Height87.5
•Projection
•Overall Height
•Recessed Depth
•Length
•Width / Depth148.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, ultra-low profile Flat Plate metal design with matching metal toggle. 10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.

- 10AX rated
- Ultra-low profile Flat Plate design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.33
•Diameter
•Height87.5
•Projection
•Overall Height
•Recessed Depth
•Length
•Width / Depth148.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20