Decorative

•Ideal for fixed appliances such as water heaters. Rounded edge metal design with matching metal rocker.

- 20A rated
- Double Pole
- With neon indicator
- With flex outlet
- Rounded Edge design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box depth 25mm

•Gross Weight0.139
•Diameter
•Height86
•Projection7.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth86
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•2G 2 way 40-400W rating. Suitable for resistive and capacitive loads. Push on/push off control. Advanced sensitivity leading edge type dimmer suitable for dimming all types of lamps both resistive and inductive. Minimum parallel capacity: 7W dimmable LED or 40W incandescence (or 0VA) Maximum parallel capacity: 100W dimmable LED or 400W incandescence (or 400VA) or purely resistive load. Suitable for mains lighting, low voltage lighting and LED lighting (for compatibility please check with lamp manufacturer). Made from high quality premium grade material, complete with integral gasket for moisture protection. Minimum mounting depth: 25mm. Dimensions: 88mm x 88mm Supplied in retail blister with full fitting instructions. Compliant to BS EN 60669-1, BS EN 60669-2. 3 year guarantee.

•Gross Weight0.224
•Diameter
•Height88
•Projection7.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth88
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty3
•Constructionpremium grade steel
•IP RatingIP20

•Ideally used to neatly cover unused or redundant boxes. This model is standard double size. Made from high quality premium grade material Complete with integral gasket for moisture protection Minimum mounting depth: n/a Dimensions: 148mm x 88mm Supplied in retail blister with full fitting instructions Compliant to BS EN 60670-1 15 year guarantee.

•Gross Weight0.17
•Diameter
•Height88
•Projection7.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth148
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Used to neatly cover unused or redundant boxes. Rounded edge metal design.

- Rounded edge design with built in gasket
- Certified to IEC 60670-1

•Gross Weight0.144
•Diameter
•Height86
•Projection7.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth146.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Accepts 2 x 25 x 50mm Modules or 1 x 50 x 50mm Modules

•Gross Weight0.063
•Diameter
•Height88
•Projection7.5
•Overall Height
•Recessed Depth
•Length88
•Width / Depth
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Rounded edge metal design

- Accepts two 25 x 50mm , or a single 50 x 50mm euro module
- Rounded edge design with built in gasket
- Minimum mounting box depth: dependent on euro module used

•Gross Weight0.0575
•Diameter
•Height86
•Projection7.5
•Overall Height
•Recessed Depth
•Length86
•Width / Depth
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•3G 2 way 40-400W rating. Suitable for resistive and capacitive loads. Push on/push off control. Advanced sensitivity leading edge type dimmer suitable for dimming all types of lamps both resistive and inductive. Minimum parallel capacity: 7W dimmable LED or 40W incandescence (or 0VA) Maximum parallel capacity: 100W dimmable LED or 400W incandescence (or 400VA) or purely resistive load. Suitable for mains lighting, low voltage lighting and LED lighting (for compatibility please check with lamp manufacturer). Made from high quality premium grade material, complete with integral gasket for moisture protection. Minimum mounting depth: 25mm. Dimensions: 148mm x 88mm Supplied in retail blister with full fitting instructions. Compliant to BS EN 60669-1, BS EN 60669-2. 3 year guarantee.

•Gross Weight0.3395
•Diameter
•Height88
•Projection7.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth148
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty3
•Constructionpremium grade steel
•IP RatingIP20

•Cooker control units enable isolation of the unit, enable: maintenance and repairs to be carried out separately, the unit can be switched off, preventing the appliance from being turned on accidentally for example whilst cleaning, control two or more cooking appliances in the same room, providing rating is sufficient. This model is double sized with 45A rating with built in 13A socket and neon’s. Made from high quality premium grade material Complete with integral gasket for moisture protection Minimum mounting depth: 35mm Dimensions: 148mm x 88mm Supplied in retail blister with full fitting instructions Compliant to BS 4177 15 year guarantee.

•Gross Weight0.2815
•Diameter
•Height88
•Projection7.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth148
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Cooker control units enable isolation of the unit so that maintenance and repairs to be carried out separately. The unit can be switched off, preventing the appliance from being turned on accidentally - for example whilst cleaning. Control two or more cooking appliances in the same room, providing rating is sufficient. This model combines a 45A switch with a 13A socket in rounded edge metal design

- 45A
- Double pole
- With neon indicators
- 13A switched socket
- Rounded edge design with built in gasket
- Certified to BS 4177, BS 1363-2
- Minimum mounting box depth: 47mm

•Gross Weight0.2605
•Diameter
•Height86
•Projection7.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth146.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Cooker control units enable isolation of the unit, enable: maintenance and repairs to be carried out separately, the unit can be switched off, preventing the appliance from being turned on accidentally for example whilst cleaning, control two or more cooking appliances in the same room, providing rating is sufficient. This model is double sized with 45A rating with built in 13A socket and neon’s. Made from high quality premium grade material Complete with integral gasket for moisture protection Minimum mounting depth: 35mm Dimensions: 148mm x 88mm Supplied in retail blister with full fitting instructions Compliant to BS 4177 15 year guarantee.

•Gross Weight0.2815
•Diameter
•Height88
•Projection7.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth148
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Cooker control units enable isolation of the unit so that maintenance and repairs to be carried out separately. The unit can be switched off, preventing the appliance from being turned on accidentally - for example whilst cleaning. Control two or more cooking appliances in the same room, providing rating is sufficient. This model combines a 45A switch with a 13A socket in rounded edge metal design

- 45A
- Double pole
- With neon indicators
- 13A switched socket
- Rounded edge design with built in gasket
- Certified to BS 4177, BS 1363-2
- Minimum mounting box depth: 47mm

•Gross Weight0.2605
•Diameter
•Height86
•Projection7.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth146.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Cooker control units enable isolation of the unit so that maintenance and repairs to be carried out separately. The unit can be switched off, preventing the appliance from being turned on accidentally - for example whilst cleaning. Control two or more cooking appliances in the same room, providing rating is sufficient. This model is double sized with 45A rating with neon. Made from high quality premium grade material. Complete with integral gasket. Compliant to all relevant British safety standards. Minimum mounting depth: 35mm. Dimensions: 148mm x 88mm. Supplied in retail blister with full fitting instructions. 15 year guarantee.

•Gross Weight0.251
•Diameter
•Height88
•Projection7.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth148
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Cooker control units enable isolation of the unit so that maintenance and repairs to be carried out separately. The unit can be switched off, preventing the appliance from being turned on accidentally - for example whilst cleaning. Control two or more cooking appliances in the same room, providing rating is sufficient. Rounded edge metal design

- 45A
- Double pole
- With neon indicator
- Rounded edge design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box depth: 47mm

•Gross Weight0.2265
•Diameter
•Height146.5
•Projection7.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth86
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Cooker control units enable isolation of the unit so that maintenance and repairs to be carried out separately. The unit can be switched off, preventing the appliance from being turned on accidentally - for example whilst cleaning. Control two or more cooking appliances in the same room, providing rating is sufficient. This model is single sized with 45A rating with neon. Made from high quality ultra slim, premium grade material. Complete with integral gasket. Compliant to all relevant British safety standards. Minimum mounting depth: 35mm. Dimensions: 88mm x 88mm. Supplied in retail blister with full fitting instructions. 15 year guarantee.

•Gross Weight0.179
•Diameter
•Height88
•Projection7.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth88
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Cooker control units enable isolation of the unit so that maintenance and repairs to be carried out separately. The unit can be switched off, preventing the appliance from being turned on accidentally - for example whilst cleaning. Control two or more cooking appliances in the same room, providing rating is sufficient. Rounded edge metal design

- 45A
- Double pole
- With neon indicator
- Rounded edge design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box depth: 47mm

•Gross Weight0.165
•Diameter
•Height86
•Projection7.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth86
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•4G 2 way 40-400W rating. Suitable for resistive and capacitive loads. Push on/push off control. Advanced sensitivity leading edge type dimmer suitable for dimming all types of lamps both resistive and inductive. Minimum parallel capacity: 7W dimmable LED or 40W incandescence (or 0VA) Maximum parallel capacity: 100W dimmable LED or 400W incandescence (or 400VA) or purely resistive load. Suitable for mains lighting, low voltage lighting and LED lighting (for compatibility please check with lamp manufacturer). Made from high quality premium grade material, complete with integral gasket for moisture protection. Minimum mounting depth: 25mm. Dimensions: 88mm x 88mm Supplied in retail blister with full fitting instructions. Compliant to BS EN 60669-1, BS EN 60669-2. 3 year guarantee.

•Gross Weight0.4055
•Diameter
•Height88
•Projection7.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth148
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty3
•Constructionpremium grade steel
•IP RatingIP20

•Accepts 4 x 25 x 50mm Modules or 2 x 50 x 50mm Modules or 1 x 50 x 50mm & 2 x 25 x 50mm Modules

•Gross Weight0.0959
•Diameter
•Height88
•Projection7.5
•Overall Height
•Recessed Depth
•Length146.5
•Width / Depth
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Rounded edge metal design

- Accepts four 25 x 50mm , or two 50 x 50mm euro module or a combination of both
- Rounded edge design with built in gasket
- Minimum mounting box depth: dependent on euro module used

•Gross Weight0.0885
•Diameter
•Height86
•Projection12.5
•Overall Height
•Recessed Depth
•Length146.5
•Width / Depth
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Ideal for TV & FM/DAB coaxial connections. Screened diplexer enables the signal from one cable to be used for both Digital TV reception and FM DAB reception. Made from high quality premium grade material. Complete with integral gasket. Compliant to all relevant British safety standards. Minimum mounting depth: 35mm. Dimensions: 88mm x 88mm Supplied in retail blister with full fitting instructions. 15 year guarantee.

•Gross Weight0.189
•Diameter
•Height88
•Projection7.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth88
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Ideal for TV & FM/DAB coaxial connections. Screened diplexer enables the signal from one cable to be used for both Digital TV reception and FM DAB reception. Rounded edge metal design

- 1 x Coaxial TV outlet (female)
- 1 x Coaxial FM/DAB outlet (male)
- Screened
- Rounded edge design with built in gasket
- Certified to BS 5733
- Minimum mounting box depth: 35mm

•Gross Weight0.174
•Diameter
•Height86
•Projection7.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth86
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Construction
•IP RatingIP20

•Perfect finishing touch to any modern home, ultra-low profile Flat Plate metal design with matching metal rocker.
10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
- 10AX rated
- Ultra-low profile Flat Plate design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.19
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, ultra-low profile Flat Plate metal design with matching metal rocker.
10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
- 10AX rated
- Ultra-low profile Flat Plate design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.19
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, ultra-low profile Flat Plate metal design with matching metal rocker.
10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
- 10AX rated
- Ultra-low profile Flat Plate design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.19
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, ultra-low profile Flat Plate metal design with matching metal rocker.
10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
- 10AX rated
- Ultra-low profile Flat Plate design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.19
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, ultra-low profile Flat Plate metal design with matching metal rocker.
10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
- 10AX rated
- Ultra-low profile Flat Plate design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.19
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, ultra-low profile Flat Plate metal design with matching metal rocker.
10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
- 10AX rated
- Ultra-low profile Flat Plate design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.19
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, ultra-low profile Flat Plate metal design with matching metal toggle.
10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
- 10AX rated
- Ultra-low profile Flat Plate design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.2
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, ultra-low profile Flat Plate metal design with matching metal toggle. 10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.

- 10AX rated
- Ultra-low profile Flat Plate design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.2
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, ultra-low profile Flat Plate metal design with matching metal toggle. 10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.

- 10AX rated
- Ultra-low profile Flat Plate design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.2
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, ultra-low profile Flat Plate metal design with matching metal toggle. 10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.

- 10AX rated
- Ultra-low profile Flat Plate design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.2
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, ultra-low profile Flat Plate metal design with matching metal toggle. 10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.

- 10AX rated
- Ultra-low profile Flat Plate design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.2
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, ultra-low profile Flat Plate metal design with matching metal toggle. 10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.

- 10AX rated
- Ultra-low profile Flat Plate design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.2
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•An intermediate switch is used when you have three switches controlling one light. A typical example of this is on a landing. There is a switch at the bottom of the stairs, one at top of the stairs and one at the end of the landing. On this circuit you would need the middle switch to be intermediate (i.e. the one at the top of the stairs) in order for all the switches to function properly. Flat Plate low profile metal design with matching metal rocker.

- 10AX rated
- Ultra low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.2
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•An intermediate switch is used when you have three switches controlling one light. A typical example of this is on a landing. There is a switch at the bottom of the stairs, one at top of the stairs and one at the end of the landing. On this circuit you would need the middle switch to be intermediate (i.e. the one at the top of the stairs) in order for all the switches to function properly. Flat Plate low profile metal design with matching metal rocker.

- 10AX rated
- Ultra low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.2
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•An intermediate switch is used when you have three switches controlling one light. A typical example of this is on a landing. There is a switch at the bottom of the stairs, one at top of the stairs and one at the end of the landing. On this circuit you would need the middle switch to be intermediate (i.e. the one at the top of the stairs) in order for all the switches to function properly. Flat Plate low profile metal design with matching metal rocker.

- 10AX rated
- Ultra low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.2
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•An intermediate switch is used when you have three switches controlling one light. A typical example of this is on a landing. There is a switch at the bottom of the stairs, one at top of the stairs and one at the end of the landing. On this circuit you would need the middle switch to be intermediate (i.e. the one at the top of the stairs) in order for all the switches to function properly. Flat Plate low profile metal design with matching metal rocker.

- 10AX rated
- Ultra low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.2
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•An intermediate switch is used when you have three switches controlling one light. A typical example of this is on a landing. There is a switch at the bottom of the stairs, one at top of the stairs and one at the end of the landing. On this circuit you would need the middle switch to be intermediate (i.e. the one at the top of the stairs) in order for all the switches to function properly. Flat Plate low profile metal design with matching metal rocker.

- 10AX rated
- Ultra low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.2
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•An intermediate switch is used when you have three switches controlling one light. A typical example of this is on a landing. There is a switch at the bottom of the stairs, one at top of the stairs and one at the end of the landing. On this circuit you would need the middle switch to be intermediate (i.e. the one at the top of the stairs) in order for all the switches to function properly. Flat Plate low profile metal design with matching metal rocker.

- 10AX rated
- Ultra low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.2
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•An intermediate switch is used when you have three switches controlling one light. A typical example of this is on a landing. There is a switch at the bottom of the stairs, one at top of the stairs and one at the end of the landing. On this circuit you would need the middle switch to be intermediate (i.e. the one at the top of the stairs) in order for all the switches to function properly. Flat Plate low profile metal design with matching metal toggle.

- 10AX rated
- Ultra low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.21
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•An intermediate switch is used when you have three switches controlling one light. A typical example of this is on a landing. There is a switch at the bottom of the stairs, one at top of the stairs and one at the end of the landing. On this circuit you would need the middle switch to be intermediate (i.e. the one at the top of the stairs) in order for all the switches to function properly. Flat Plate low profile metal design with matching metal toggle.

- 10AX rated
- Ultra low profile design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.21
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length87.5
•Width / Depth87.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20