Decorative

•Perfect finishing touch to any modern home, rounded edge metal design with matching metal toggle. 2-way switches are generally used when there are two switches controlling one light. A typical example of this is when a room has two entrances (like a through lounge) where there is a switch positioned at either entrance.

- 10AX rated
- 2-way
- Rounded Edge design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.1215
•Diameter
•Height86
•Projection7.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth86
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•2 way switches are generally used when there are two switches controlling one light. A typical example of this is when a room has two entrances (like a through lounge) where there is a switch positioned at either entrance. Made from high quality premium grade material Complete with integral gasket. Compliant to all relevant British safety standards. Minimum mounting depth: 16mm. Dimensions: 88mm x 88mm. Supplied in retail blister with full fitting instructions. 15 year guarantee.

•Gross Weight0.131
•Diameter
•Height88
•Projection7.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth88
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, rounded edge metal design with matching metal rocker. 10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.

- 10AX rated
- 2-way
- Rounded Edge design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.1145
•Diameter
•Height86
•Projection7.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth86
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•2 way toggle switches are generally used when there are two switches controlling one light. A typical example of this is when a room has two entrances (like a through lounge) where there is a switch positioned at either entrance. Made from high quality premium grade material Complete with integral gasket for moisture protection Minimum mounting depth: 16mm Dimensions: 88mm x 88mm Supplied in retail blister with full fitting instructions Compliant to BS EN 60669-1 15 year guarantee.

•Gross Weight0.135
•Diameter
•Height88
•Projection7.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth88
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, square edge metal design with matching metal toggle. 2-way switches are generally used when there are two switches controlling one light. A typical example of this is when a room has two entrances (like a through lounge) where there is a switch positioned at either entrance.

- 10AX rated
- 2-way
- Square Edge design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.163
•Diameter
•Height89
•Projection10.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth89
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, square edge metal design with matching metal rocker. 10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.

- 10AX rated
- 2-way
- Square Edge design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.149
•Diameter
•Height89
•Projection10.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth89
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•An intermediate switch is used when you have three switches controlling one light. A typical example of this is on a landing. There is a switch at the bottom of the stairs, one at top of the stairs and one at the end of the landing. On this circuit you would need the middle switch to be intermediate (i.e. the one at the top of the stairs) in order for all the switches to function properly. Made from high quality premium grade material. Complete with integral gasket. Compliant to all relevant British safety standards. Minimum mounting depth: 16mm. Dimensions: 88mm x 88mm. Supplied in retail blister with full fitting instructions. 15 year guarantee.

•Gross Weight0.1375
•Diameter
•Height88
•Projection7.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth88
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, rounded edge metal design with matching metal rocker. An intermediate switch is used when you have three switches controlling one light. A typical example of this is on a landing. There is a switch at the bottom of the stairs, one at top of the stairs and one at the end of the landing. On this circuit you would need the middle switch to be intermediate (i.e. the one at the top of the stairs) in order for all the switches to function properly.

- 10AX rated
- Intermediate
- Rounded Edge design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.1245
•Diameter
•Height86
•Projection7.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth86
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, square edge metal design with matching metal rocker. An intermediate switch is used when you have three switches controlling one light. A typical example of this is on a landing. There is a switch at the bottom of the stairs, one at top of the stairs and one at the end of the landing. On this circuit you would need the middle switch to be intermediate (i.e. the one at the top of the stairs) in order for all the switches to function properly.

- 10AX rated
- Intermediate
- Square Edge design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.156
•Diameter
•Height89
•Projection10.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth89
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•An intermediate switch is used when you have three switches controlling one light. A typical example of this is on a landing. There is a switch at the bottom of the stairs, one at top of the stairs and one at the end of the landing. On this circuit you would need the middle switch to be intermediate (i.e. the one at the top of the stairs) in order for all the switches to function properly. Made from high quality premium grade material. Complete with integral gasket. Compliant to all relevant British safety standards. Minimum mounting depth: 16mm. Dimensions: 88mm x 88mm. Supplied in retail blister with full fitting instructions. 15 year guarantee.

•Gross Weight0.143
•Diameter
•Height88
•Projection7.5
•Overall Height
•Recessed Depth
•Length88
•Width / Depth
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, rounded edge metal design with matching metal toggle. An intermediate switch is used when you have three switches controlling one light. A typical example of this is on a landing. There is a switch at the bottom of the stairs, one at top of the stairs and one at the end of the landing. On this circuit you would need the middle switch to be intermediate (i.e. the one at the top of the stairs) in order for all the switches to function properly.

- 10AX rated
- Intermediate
- Rounded Edge design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.1295
•Diameter
•Height86
•Projection7.5
•Overall Height
•Recessed Depth
•Length86
•Width / Depth
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, square edge metal design with matching metal toggle. An intermediate switch is used when you have three switches controlling one light. A typical example of this is on a landing. There is a switch at the bottom of the stairs, one at top of the stairs and one at the end of the landing. On this circuit you would need the middle switch to be intermediate (i.e. the one at the top of the stairs) in order for all the switches to function properly.

- 10AX rated
- Intermediate
- Sqaure Edge design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.163
•Diameter
•Height89
•Projection10.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth89
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, rounded edge metal design with matching metal toggle. 2-way switches are generally used when there are two switches controlling one light. A typical example of this is when a room has two entrances (like a through lounge) where there is a switch positioned at either entrance.

- 10AX rated
- 2-way
- Rounded Edge design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.1375
•Diameter
•Height86
•Projection7.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth86
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•2 way switches are generally used when there are two switches controlling one light. A typical example of this is when a room has two entrances (like a through lounge) where there is a switch positioned at either entrance. Made from high quality premium grade material Complete with integral gasket. Compliant to all relevant British safety standards. Minimum mounting depth: 16mm. Dimensions: 88mm x 88mm. Supplied in retail blister with full fitting instructions. 15 year guarantee.

•Gross Weight0.14
•Diameter
•Height88
•Projection7.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth88
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, rounded edge metal design with matching metal rocker. 10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.

- 10AX rated
- 2-way
- Rounded Edge design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.1265
•Diameter
•Height86
•Projection7.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth86
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•2 way toggle switches are generally used when there are two switches controlling one light. A typical example of this is when a room has two entrances (like a through lounge) where there is a switch positioned at either entrance. Made from high quality premium grade material Complete with integral gasket for moisture protection Minimum mounting depth: 16mm Dimensions: 88mm x 88mm Supplied in retail blister with full fitting instructions Compliant to BS EN 60669-1 15 year guarantee.

•Gross Weight0.1535
•Diameter
•Height88
•Projection7.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth88
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Ideal for providing a safe and simple method of isolating fan units in en-suite bathrooms, family bathrooms, utility rooms, store rooms etc. Often the fan unit will be wired into the lighting circuit for convenience and efficiency. With this kind of installation there is often a need to leave the lighting circuit live whilst isolating the fan for maintenance. This model is triple pole with a 10A rating. Made from high quality premium grade material. Complete with integral gasket. Compliant to all relevant British safety standards. Minimum mounting depth: 16mm. Dimensions: 88mm x 88mm. Supplied in retail blister with full fitting instructions. 15 year guarantee.

•Gross Weight0.1415
•Diameter
•Height88
•Projection7.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth88
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, rounded edge metal design with matching metal rocker. Ideal for providing a safe and simple method of isolating fan units in en-suite bathrooms, family bathrooms, utility rooms, store rooms etc. Often the fan unit will be wired into the lighting circuit for convenience and efficiency. With this kind of installation there is often a need to leave the lighting circuit live whilst isolating the fan for maintenance.

- 10AX rated
- Triple Pole
- Rounded Edge design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.131
•Diameter
•Height86
•Projection7.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth86
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Ideal for controlling 3 separate lights. 2 way switches are generally used when there are two switches controlling the lights. A typical example of this is when a room has two entrances (like a through lounge) where there is a switch positioned at either entrance. Made from high quality premium grade material. Complete with integral gasket. Compliant to all relevant British safety standards. Minimum mounting depth: 16mm. Dimensions: 88mm x 88mm. Supplied in retail blister with full fitting instructions. 15 year guarantee.

•Gross Weight0.21
•Diameter
•Height88
•Projection7.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth88
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, rounded edge metal design with matching metal rocker. 10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.

- 10AX rated
- 2-way
- Rounded Edge design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.1365
•Diameter
•Height86
•Projection7.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth86
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•2 way toggle switches are generally used when there are two switches controlling one light. A typical example of this is when a room has two entrances (like a through lounge) where there is a switch positioned at either entrance. Made from high quality premium grade material Complete with integral gasket for moisture protection Minimum mounting depth: 16mm Dimensions: 148mm x 88mm Supplied in retail blister with full fitting instructions Compliant to BS EN 60669-1 15 year guarantee.

•Gross Weight0.2445
•Diameter
•Height88
•Projection7.5
•Overall Height
•Recessed Depth
•Length148
•Width / Depth
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, rounded edge metal design with matching metal toggle. 2-way switches are generally used when there are two switches controlling one light. A typical example of this is when a room has two entrances (like a through lounge) where there is a switch positioned at either entrance.

- 10AX rated
- 2-way
- Rounded Edge design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.2195
•Diameter
•Height86
•Projection7.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth146.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Ideal for controlling 4 separate lights. 2 way switches are generally used when there are two switches controlling the lights. A typical example of this is when a room has two entrances (like a through lounge) where there is a switch positioned at either entrance. Made from high quality premium grade material. Complete with integral gasket. Compliant to all relevant British safety standards. Minimum mounting depth: 16mm. Dimensions: 148mm x 88mm. Supplied in retail blister with full fitting instructions. 15 year guarantee.

•Gross Weight0.242
•Diameter
•Height88
•Projection7.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth148
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, rounded edge metal design with matching metal rocker. 10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.

- 10AX rated
- 2-way
- Rounded Edge design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.2215
•Diameter
•Height86
•Projection7.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth146.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•2 way toggle switches are generally used when there are two switches controlling one light. A typical example of this is when a room has two entrances (like a through lounge) where there is a switch positioned at either entrance. Made from high quality premium grade material Complete with integral gasket for moisture protection Minimum mounting depth: 16mm Dimensions: 148mm x 88mm Supplied in retail blister with full fitting instructions Compliant to BS EN 60669-1 15 year guarantee.

•Gross Weight0.261
•Diameter
•Height88
•Projection7.5
•Overall Height
•Recessed Depth
•Length148
•Width / Depth
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, rounded edge metal design with matching metal toggle. 2-way switches are generally used when there are two switches controlling one light. A typical example of this is when a room has two entrances (like a through lounge) where there is a switch positioned at either entrance.

- 10AX rated
- 2-way
- Rounded Edge design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.2395
•Diameter
•Height86
•Projection7.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth146.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Ideal for controlling 6 separate lights. 2 way switches are generally used when there are two switches controlling the lights. A typical example of this is when a room has two entrances (like a through lounge) where there is a switch positioned at either entrance. Made from high quality premium grade material. Complete with integral gasket. Compliant to all relevant British safety standards. Minimum mounting depth: 16mm. Dimensions: 88mm x 148mm. Supplied in retail blister with full fitting instructions. 15 year guarantee.

•Gross Weight0.262
•Diameter
•Height88
•Projection7.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth148
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Perfect finishing touch to any modern home, rounded edge metal design with matching metal rocker. 10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.

- 10AX rated
- 2-way
- Rounded Edge design with built in gasket
- Certified to EN 60669-1
- Minimum mounting box 16mm

•Gross Weight0.243
•Diameter
•Height86
•Projection7.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth146.5
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•This shaver socket comes complete with transformer and isolates the mains supply making it safe and suitable for bathroom use. Dual voltage 115V/230V. Made from high quality premium grade material. IP41 rating. Complete with integral gasket for moisture protection Minimum mounting depth: 47mm Dimensions: 148mm x 88mm Supplied in retail blister with full fitting instructions Compliant to BS EN 61558-2-5, BS EN 61558-1 15 year guarantee.

•Gross Weight0.705
•Diameter
•Height148
•Projection7.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth88
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP41
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP41

•Provides a desirable decorative touch to any home, contemporary rounded edge metal design. Perfect upgrade to any bathroom, dual voltage shaver socket.

- 115/230VAC 20VA
- IP41
- Dual Voltage Shaver Socket
- Rounded edge design with built in gasket
- Certified to EN 61558
- Minimum mounting box depth: 47mm

•Gross Weight0.687
•Diameter
•Height146.5
•Projection7.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth86
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP RatingIP41
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP41

•This shaver socket comes complete with transformer and isolates the mains supply making it safe and suitable for bathroom use. Dual voltage 115V/230V. Made from high quality premium grade material. IP41 rating. Complete with integral gasket for moisture protection Minimum mounting depth: 47mm Dimensions: 148mm x 88mm Supplied in retail blister with full fitting instructions Compliant to BS EN 61558-2-5, BS EN 61558-1 15 year guarantee.

•Gross Weight0.7045
•Diameter
•Height148
•Projection7.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth88
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP41
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP41

•Provides a desirable decorative touch to any home, contemporary rounded edge metal design. Perfect upgrade to any bathroom, dual voltage shaver socket.

- 115/230VAC 20VA
- IP41
- Dual Voltage Shaver Socket
- Rounded edge design with built in gasket
- Certified to EN 61558
- Minimum mounting box depth: 47mm

•Gross Weight0.687
•Diameter
•Height146.5
•Projection7.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth86
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP RatingIP41
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP41

•Under cabinet rectangular LED light, ideal for modern kitchens with built in diffuser

- Rectangular opal diffuser
- For use with 12V DC constant voltage driver - not included (ML product no. 12VDCA)
- Non-dimmable
- Max. 3 units per 12VDCA LED driver
- Pre-wired with 1.5m cable

4000K, Cool White, 90lm

•Gross Weight0.141
•Diameter
•Height55
•Projection
•Overall Height
•Recessed Depth
•Length141
•Width / Depth86
•Cut Out Diameter
•Materialstainless steel
•Colour of fittingSatin chrome
•Primary Voltage
•IP Rating
•Cable Length
•Lamp TypeSMD 3014
•Lamp Base
•No of Lamps/Leds24
•Dimmable Y/N ?yes
•Max Wattage
•LED Life exp50
•Energy Rating (Class)A
•Lumens90
•Light Colour87.7
•CRI110
•Beam angle110
•Warranty1
•Construction
•IP Rating

•Ideal upgrade to existing single switched sockets around the home. 13A rated with DP switch. Made from high quality premium grade material. Complete with integral gasket. Compliant to all relevant British safety standards. Minimum mounting depth: 25mm. Dimensions: 88mm x 88mm. Supplied in retail blister with full fitting instructions. 15 year guarantee.

•Gross Weight0.164
•Diameter
•Height88
•Projection7.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth88
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Provides a desirable decorative touch to any home, contemporary rounded edge metal design with matching metal rockers, unique socket insert design that is completely hidden once a plug is inserted.

- 13A Switched Socket
- Double Pole Switch
- Rounded Edge design with built in gasket
- Certified to BS 1363:2
- Minimum mounting box depth 25mm

•Gross Weight0.1505
•Diameter
•Height86
•Projection7.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth86
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•13A Switched socket with the added convenience of USB charging. Suitable for charging USB devices such as mobile phones, smartphones, digital cameras and tablets. This device charges at 5V DC 1A (1000mA) Apple iPhone charges at 1A, Apple iPod's charge at 1A, Other Smartphones and portable USB devices charge at between 500mA and 1A. This solution is designed for convenience and to free up socket space from unsightly chargers and will charge the majority of portable USB devices. This device will also charge your iPad, Kindle, and other tablet PC's but at a much slower rate to the original charger. NB: Please note using sub standard or non-authorized cables with Apple products may effect units ability to charge efficiently. Min mounting box depth 25mm

•Gross Weight0.11
•Diameter
•Height86
•Projection12
•Overall Height
•Recessed Depth
•Length
•Width / Depth86
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty1
•Constructionthermoset resin
•IP RatingIP20

•Ideal upgrade to existing single switched sockets around the home. 13A rated with DP switch. Made from high quality premium grade material. Complete with integral gasket. Compliant to all relevant British safety standards. Minimum mounting depth: 25mm. Dimensions: 88mm x 88mm. Supplied in retail blister with full fitting instructions. 15 year guarantee.

•Gross Weight0.164
•Diameter
•Height88
•Projection7.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth88
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•Provides a desirable decorative touch to any home, contemporary rounded edge metal design with matching metal rockers, unique socket insert design that is completely hidden once a plug is inserted.

- 13A Switched Socket
- Double Pole Switch
- Rounded Edge design with built in gasket
- Certified to BS 1363:2
- Minimum mounting box depth 25mm

•Gross Weight0.148
•Diameter
•Height86
•Projection7.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth86
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty15
•Constructionpremium grade steel
•IP RatingIP20

•This charger socket is a great finishing touch to any modern home. Decorative bevel edge metal design with matching metal rockers. Built in Dual USB Charger
- 13A Switched socket
- Dual USB Charging 5V DC2.1A (shared)
- Decorative bevel edge design with built in gasket
- Certified to BS1363-2, EMC Certified and ErP Ready
- Minimum mounting box depth 25-35mm*

*dependent on wiring conditions

WE RECOMMEND YOU ALWAYS USE CERTIFIED USB CABLES FOR SAFETY AND TO ENSURE COMPATIBILITY

•Gross Weight0.1875
•Diameter
•Height88
•Projection7.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth88
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty3
•Constructionpremium grade steel
•IP RatingIP20

•This charger socket is a great finishing touch to any modern home. Decorative rounded edge metal design with matching metal rocker. Built in Dual USB Charger
- 13A Switched socket
- Dual USB Charging 5V DC2.1A (shared)
- Decorative round edge design with built in gasket
- Certified to BS1363-2, EMC Certified and ErP Ready
- Minimum mounting box depth 25-35mm*

*dependent on wiring conditions

WE RECOMMEND YOU ALWAYS USE CERTIFIED USB CABLES FOR SAFETY AND TO ENSURE COMPATIBILITY

•Gross Weight0.1745
•Diameter
•Height86
•Projection7.5
•Overall Height
•Recessed Depth
•Length
•Width / Depth86
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage230
•IP RatingIP20
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty3
•Constructionpremium grade steel
•IP RatingIP20