Cranbrook Electrics

Tel: 0208 502 5454

sales@cranbrookelectrics.co.uk

0Items:

£0.00Total:

Free UK delivery available

Free Delivery on all orders of £49 or more
45 Items found
1 2
(3 Pack) Integral Evofire 70mm IP65 White Fire Rated D'light + Insulation Guard
£23.40

• Pack of 3

The Evofire Fire Rated Downlight is a safe and attractive fitting for a GU10 or MR16 LED lamp. The fully open design of the Evofire does not conceal your lamp in a large metal canister, which can trap some of the heat it generates, lowering lamp lifetime and performance. Lamps installed in an Evofire run at up to 10 degrees C cooler than a typical can-style fire rated downlight from leading LED brands - this can extend the lifetime of your lamps.

As well being very tough thanks to its steel construction, The Evofire is also a highly aesthetic choice for Fire Rated lighting. The 1mm blend-in bezel is up to 10 times thinner than typical IP65 rated downlights, with a high quality powder coating and fits almost flush with your ceiling, so the downlight looks discreet and pleasing in any setting.

Featuring a built-in Insulation Guard which allows loft insulation to be safely laid on top of the downlight, while maintaining air-flow around the lamp.

Evolutionary Fire Rated fitting designed by Integral LED
Developed in the UK - Patent Pending
Fire Rating 30/60/90 minutes - Tested in UKAS Accredited Lab
Ultra-thin 1mm 'blend-in' bezel
Easy to install Loop-in/Loop-out piano-key style terminal block
Supplied with GU10 holder

• Partcode: ILDLFR70D003-3
• Range Name: EVOFIRE
• Application: Indoor, General Lighting
• Market Segment: Commercial indoor, Residential indoor
• Product Type: Fire Rated
• Warranty: 3 Yrs
• CE / RoHS: Yes

• Product Finish: Matt white
• Material: Steel, Glass
• Construction: Pressed Steel, Glass
• Length: 83mm
• Diameter: 85mm
• Weight (Unpackaged Single Unit): 100g
• Cut Out Diameter: 70mm
• Lum. Shape: Round
• Lum. Fixing: Recess mounted
• Fire Rating: 30, 60, 90

230V IP65 Fire-Rated Low Energy Shower Downlight Brushed Chrome
£9.70

•IP65 Low Energy Shower Downlight, Brushed Chrome finish. GU10 11 Watt max compact fluorescent lamp (not supplied with fitting - product codes GU109W (9 Watt) and GU1011W (11 Watt). Double insulated fitting. Twist and lock front ring to secure lamp. Electrical termination via 10 Amp connector block within secure enclosue c/w cord grip. Outer diameter 87mm, recessed depth 130mm. Non-dimmable. 150mm recommended ceiling void required. Spring clip fixings with a recommended maximum ceiling thickness of 30mm. Cut-out 72mm. NOTE: All of our fire-rated products are compliant with RoHS, WEEE and Part B Building Regulations. They meet BS476 Part 21, 1987 Standard and have also been approved by Warringtonfire Global Safety, Part E Acoustics and BS476 Part 23.

•Gross Weight0.35
•Diameter87
•Height
•Projection
•Overall Height
•Recessed Depth
•Length
•Width / Depth
•Cut Out Diameter72
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty
•Construction
•IP Rating

230V IP65 Fire-Rated Low Energy Shower Downlight Chrome
£9.70

•IP65 Low Energy Shower Downlight, Chrome finish. GU10 11 Watt max compact fluorescent lamp (not supplied with fitting - product codes GU109W (9 Watt) and GU1011W (11 Watt). Double insulated fitting. Twist and lock front ring to secure lamp. Electrical termination via 10 Amp connector block within secure enclosue c/w cord grip. Outer diameter 87mm, recessed depth 130mm. Non-dimmable. 150mm recommended ceiling void required. Spring clip fixings with a recommended maximum ceiling thickness of 30mm. Cut-out 72mm. NOTE: All of our fire-rated products are compliant with RoHS, WEEE and Part B Building Regulations. They meet BS476 Part 21, 1987 Standard and have also been approved by Warringtonfire Global Safety, Part E Acoustics and BS476 Part 23.

•Gross Weight0.35
•Diameter87
•Height
•Projection
•Overall Height
•Recessed Depth
•Length
•Width / Depth
•Cut Out Diameter72
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty
•Construction
•IP Rating

230V IP65 Fire-Rated Low Energy Shower Downlight White
£8.56

•IP65 Low Energy Shower Downlight, White finish. GU10 11 Watt max compact fluorescent lamp (not supplied with fitting - product codes GU109W (9 Watt) and GU1011W (11 Watt). Double insulated fitting. Twist and lock front ring to secure lamp. Electrical termination via 10 Amp connector block within secure enclosue c/w cord grip. Outer diameter 87mm, recessed depth 130mm. Non-dimmable. 150mm recommended ceiling void required. Spring clip fixings with a recommended maximum ceiling thickness of 30mm. Cut-out 72mm. NOTE: All of our fire-rated products are compliant with RoHS, WEEE and Part B Building Regulations. They meet BS476 Part 21, 1987 Standard and have also been approved by Warringtonfire Global Safety, Part E Acoustics and BS476 Part 23.

•Gross Weight0.35
•Diameter87
•Height
•Projection
•Overall Height
•Recessed Depth
•Length
•Width / Depth
•Cut Out Diameter72
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty
•Construction
•IP Rating

230V IP65 GU10  Fire-Rated Shower Downlight Brass
£8.77

•IP65 Die-Cast GU10 Shower Downlight, Brass finish. GU10 35/50 Watt lamp (not supplied with fitting - product codes GU10-35 or GU10-35L (35 Watt) and GU10 or GU10L (50 Watt). 35 WATT LAMPS ONLY FOR USE ON PLASTIC CLAD CEILINGS. 50 WATT GU10 LAMPS SUITABLE FOR TRADITIONAL PLASTERBOARD CEILINGS. Class 1, must be earthed. Twist and lock front ring to secure lamp. Electrical termination via 10 Amp connector block within secure enclosue c/w cord grip. Outer diameter 87mm, recessed depth 115mm. Dimmable. 135mm recommended ceiling void required. Spring clip fixings with a recommended maximum ceiling thickness of 30mm. Cut-out 72mm. NOTE: All of our fire-rated products are compliant with RoHS, WEEE and Part B Building Regulations. They meet BS476 Part 21, 1987 Standard and have also been approved by Warringtonfire Global Safety, Part E Acoustics and BS476 Part 23.

•Gross Weight0.35
•Diameter
•Height
•Projection
•Overall Height
•Recessed Depth
•Length
•Width / Depth
•Cut Out Diameter
•Material
•Colour of fitting
•Primary Voltage
•IP Rating
•Cable Length
•Lamp Type
•Lamp Base
•No of Lamps/Leds
•Dimmable Y/N ?
•Max Wattage
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty
•Construction
•IP Rating

230V IP65 GU10 IC Fire-Rated Shower Downlight Brass
£8.75

•IP65 Die-Cast GU10 Insulation Compatible Downlight, Brass finish. GU10 50w max. 35w max LAMPS ONLY FOR USE ON PLASTIC CLAD CEILINGS. Class 1, must be earthed. Twist and lock front ring to secure lamp. Compatible with standard GU10 Halogen and ideal for true retrofit LED and CFL Lamps. Electrical termination via 10 Amp connector block within secure enclosue c/w cord grip. Outer diameter 87mm, recessed depth 119mm. Dimmable. 129mm recommended ceiling void required. Spring clip fixings with a recommended maximum ceiling thickness of 30mm. Cut-out 72mm. NOTE: All of our fire-rated products are compliant with RoHS, WEEE and Part B Building Regulations. They meet BS476 Part 21, 1987 Standard and have also been approved by Warringtonfire Global Safety, Part E Acoustics and BS476 Part 23.

•Gross Weight0.355
•Diameter87
•Height97.5
•Projection
•Overall Height119
•Recessed Depth
•Length
•Width / Depth
•Cut Out Diameter72
•MaterialPressed Steel + Aluminium
•Colour of fittingBRASS
•Primary Voltage230
•IP RatingIP65
•Cable Length
•Lamp TypeGU10
•Lamp BaseGU10
•No of Lamps/Leds1
•Dimmable Y/N ?lamp dependent
•Max Wattage50w
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty1
•Construction
•IP Rating

230V IP65 GU10 IC Fire-Rated Shower Downlight Brushed Chrome
£8.75

•IP65 Die-Cast GU10 Insulation Compatible Downlight, Brushed Chrome. GU10 50w max. 35w max LAMPS ONLY FOR USE ON PLASTIC CLAD CEILINGS. Class 1, must be earthed. Twist and lock front ring to secure lamp. Compatible with standard GU10 Halogen and ideal for all true retrofit LED and CFL Lamps. Electrical termination via 10 Amp connector block within secure enclosue c/w cord grip. Outer diameter 87mm, recessed depth 119mm. Dimmable. 129mm recommended ceiling void required. Spring clip fixings with a recommended maximum ceiling thickness of 30mm. Cut-out 72mm. NOTE: All of our fire-rated products are compliant with RoHS, WEEE and Part B Building Regulations. They meet BS476 Part 21, 1987 Standard and have also been approved by Warringtonfire Global Safety, Part E Acoustics and BS476 Part 23.

•Gross Weight0.355
•Diameter87
•Height97.5
•Projection
•Overall Height119
•Recessed Depth
•Length
•Width / Depth
•Cut Out Diameter72
•MaterialPressed Steel + Aluminium
•Colour of fittingBrushed Chrome
•Primary Voltage230
•IP RatingIP65
•Cable Length
•Lamp TypeGU10
•Lamp BaseGU10
•No of Lamps/Leds1
•Dimmable Y/N ?lamp dependent
•Max Wattage50w
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty1
•Construction
•IP Rating

230V IP65 GU10 IC Fire-Rated Shower Downlight Chrome
£8.75

•IP65 Die-Cast GU10 Insulation Compatible Downlight, chrome finish. GU10 50w max. 35w max LAMPS ONLY FOR USE ON PLASTIC CLAD CEILINGS. Class 1, must be earthed. Twist and lock front ring to secure lamp. Compatible with standard GU10 Halogen and ideal for true retrofit LED and CFL Lamps. Electrical termination via 10 Amp connector block within secure enclosue c/w cord grip. Outer diameter 87mm, recessed depth 119mm. Dimmable. 129mm recommended ceiling void required. Spring clip fixings with a recommended maximum ceiling thickness of 30mm. Cut-out 72mm. NOTE: All of our fire-rated products are compliant with RoHS, WEEE and Part B Building Regulations. They meet BS476 Part 21, 1987 Standard and have also been approved by Warringtonfire Global Safety, Part E Acoustics and BS476 Part 23.

•Gross Weight0.355
•Diameter87
•Height97.5
•Projection
•Overall Height119
•Recessed Depth
•Length
•Width / Depth
•Cut Out Diameter72
•MaterialPressed Steel + Aluminium
•Colour of fittingchrome
•Primary Voltage230
•IP RatingIP65
•Cable Length
•Lamp TypeGU10
•Lamp Base
•No of Lamps/Leds1
•Dimmable Y/N ?yes
•Max Wattage50w
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty1
•Construction
•IP Rating

230V IP65 GU10 IC Fire-Rated Shower Downlight White
£7.45

•IP65 Die-Cast GU10 Insulation Compatible Downlight, White. GU10 50w max. 35w max LAMPS ONLY FOR USE ON PLASTIC CLAD CEILINGS. Class 1, must be earthed. Twist and lock front ring to secure lamp. Compatible with standard GU10 Halogen and ideal for true retrofit LED and CFL lamps. Electrical termination via 10 Amp connector block within secure enclosue c/w cord grip. Outer diameter 87mm, recessed depth 119mm. Dimmable. 129mm recommended ceiling void required. Spring clip fixings with a recommended maximum ceiling thickness of 30mm. Cut-out 72mm. NOTE: All of our fire-rated products are compliant with RoHS, WEEE and Part B Building Regulations. They meet BS476 Part 21, 1987 Standard and have also been approved by Warringtonfire Global Safety, Part E Acoustics and BS476 Part 23.

•Gross Weight0.355
•Diameter87
•Height97.5
•Projection
•Overall Height119
•Recessed Depth
•Length
•Width / Depth
•Cut Out Diameter72
•MaterialPressed Steel + Aluminium
•Colour of fittingwhite
•Primary Voltage230
•IP RatingIP65
•Cable Length
•Lamp TypeGU10
•Lamp BaseGU10
•No of Lamps/Leds1
•Dimmable Y/N ?lamp dependent
•Max Wattage50w
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty1
•Construction
•IP Rating

EVO Fixed IP65 Brass Bezel
£1.98

•EVO IP65 BRASS FIXED BEZEL 50W MAX
FOR USE WITH EVOF AND EVOXLF.
SUITS GU10 HALOGEN MAX 50W AND MOST GU10 RETROFIT LED GU10 LAMPS

•Gross Weight0.0335
•Diameter80
•Height5
•Projection
•Overall Height
•Recessed Depth
•Length
•Width / Depth
•Cut Out Diameter72
•MaterialDie Cast Aluminium
•Colour of fittingBRASS
•Primary Voltage230
•IP RatingIP65
•Cable Length
•Lamp TypeGU10
•Lamp Base
•No of Lamps/Leds1
•Dimmable Y/N ?lamp dependent
•Max Wattage50w
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty1
•Construction
•IP Rating

EVO Fixed IP65 Brushed Chrome Bezel
£5.08

•EVO IP65 BRUSHED CHROME FIXED BEZEL 50W MAX
FOR USE WITH EVOF AND EVOXLF.
SUITS GU10 HALOGEN MAX 50W AND MOST GU10 RETROFIT LED GU10 LAMPS

•Gross Weight0.064
•Diameter80
•Height5
•Projection
•Overall Height
•Recessed Depth
•Length
•Width / Depth
•Cut Out Diameter72
•MaterialDie Cast Aluminium
•Colour of fittingBrushed Chrome
•Primary Voltage230
•IP RatingIP65
•Cable Length
•Lamp TypeGU10
•Lamp Base
•No of Lamps/Leds1
•Dimmable Y/N ?lamp dependent
•Max Wattage50w
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty1
•Construction
•IP Rating

EVO Fixed IP65 Chrome Bezel
£5.08

•EVO IP65 CHROME FIXED BEZEL 50W MAX
FOR USE WITH EVOF AND EVOXLF.
SUITS GU10 HALOGEN MAX 50W AND MOST GU10 RETROFIT LED GU10 LAMPS
***CHROME FINISH***

•Gross Weight0.0645
•Diameter80
•Height5
•Projection
•Overall Height
•Recessed Depth
•Length
•Width / Depth
•Cut Out Diameter72
•MaterialDie Cast Aluminium
•Colour of fittingchrome
•Primary Voltage230
•IP RatingIP65
•Cable Length
•Lamp TypeGU10
•Lamp Base
•No of Lamps/Leds1
•Dimmable Y/N ?lamp dependent
•Max Wattage50w
•LED Life exp
•Energy Rating (Class)
•Lumens
•Light Colour
•CRI
•Beam angle
•Warranty1
•Construction
•IP Rating

Fire Rated MV/LV Showerlight - Antique Brass
Please contact us for stock availability

Fire Rated MV/LV Showerlight - Antique Brass

Fire Rated MV/LV Showerlight - Brass
Please contact us for stock availability

Fire Rated MV/LV Showerlight - Brass

Fire Rated MV/LV Showerlight - Chrome
Please contact us for stock availability

Fire Rated MV/LV Showerlight - Chrome

Fire Rated MV/LV Showerlight - Matt White
Please contact us for stock availability

Fire Rated MV/LV Showerlight - Matt White

Fire Rated MV/LV Showerlight - Satin Nickel
Please contact us for stock availability

Fire Rated MV/LV Showerlight - Satin Nickel

Fire Rated MV/LV Showerlight - Satin Silver
Please contact us for stock availability

Fire Rated MV/LV Showerlight - Satin Silver

Fire Rated MV/LV Showerlight - White
Please contact us for stock availability

Fire Rated MV/LV Showerlight - White

Integral Evofire 70mm cutout IP65 White Fire Rated Downlight + Insulation Guard
£8.11

The Evofire Fire Rated Downlight is a safe and attractive fitting for a GU10 or MR16 LED lamp. The fully open design of the Evofire does not conceal your lamp in a large metal canister, which can trap some of the heat it generates, lowering lamp lifetime and performance. Lamps installed in an Evofire run at up to 10 degrees C cooler than a typical can-style fire rated downlight from leading LED brands - this can extend the lifetime of your lamps.

As well being very tough thanks to its steel construction, The Evofire is also a highly aesthetic choice for Fire Rated lighting. The 1mm blend-in bezel is up to 10 times thinner than typical IP65 rated downlights, with a high quality powder coating and fits almost flush with your ceiling, so the downlight looks discreet and pleasing in any setting.

Featuring a built-in Insulation Guard which allows loft insulation to be safely laid on top of the downlight, while maintaining air-flow around the lamp.

Evolutionary Fire Rated fitting designed by Integral LED
Developed in the UK - Patent Pending
Fire Rating 30/60/90 minutes - Tested in UKAS Accredited Lab
Ultra-thin 1mm 'blend-in' bezel
Easy to install Loop-in/Loop-out piano-key style terminal block
Supplied with GU10 holder

• Partcode: ILDLFR70D003
• Range Name: EVOFIRE
• Application: Indoor, General Lighting
• Market Segment: Commercial indoor, Residential indoor
• Product Type: Fire Rated
• Warranty: 3 Yrs
• CE / RoHS: Yes

• Product Finish: Matt white
• Material: Steel, Glass
• Construction: Pressed Steel, Glass
• Length: 83mm
• Diameter: 85mm
• Weight (Unpackaged Single Unit): 100g
• Cut Out Diameter: 70mm
• Lum. Shape: Round
• Lum. Fixing: Recess mounted
• Fire Rating: 30, 60, 90

Integral Evofire 70mm cutout IP65 White Fire Rated Downlight Slim Recessed
£8.23

The Evofire Fire Rated Downlight is a safe and attractive fitting for a GU10 or MR16 LED lamp. The fully open design of the Evofire does not conceal your lamp in a large metal canister, which can trap some of the heat it generates, lowering lamp lifetime and performance. Lamps installed in an Evofire run at up to 10 degrees C cooler than a typical can-style fire rated downlight from leading LED brands - this can extend the lifetime of your lamps.

As well being very tough thanks to its steel construction, The Evofire is also a highly aesthetic choice for Fire Rated lighting. The 1mm blend-in bezel is up to 10 times thinner than typical IP65 rated downlights, with a high quality powder coating and fits almost flush with your ceiling, so the downlight looks discreet and pleasing in any setting.

Evolutionary Fire Rated fitting designed by Integral LED
Developed in the UK - Patent Pending
Fire Rating 30/60/90 minutes - Tested in UKAS Accredited Lab
Ultra-thin 1mm 'blend-in' bezel
Easy to install Loop-in/Loop-out piano-key style terminal block

• Partcode: ILDLFR70D011
• Range Name: EVOFIRE
• Application: Indoor, General Lighting
• Market Segment: Commercial indoor, Residential indoor
• Product Type: Fire Rated
• Warranty: 3 Yrs
• CE / RoHS: Yes

• Product Finish: Matt white
• Material: Steel, Glass
• Construction: Pressed Steel, Glass
• Length: 39mm
• Diameter: 85mm
• Weight (Unpackaged Single Unit): 60g
• Cut Out Diameter: 70mm
• Lum. Shape: Round
• Lum. Fixing: Recess mounted
• Fire Rating: 30, 60, 90

Integral Evofire 70mm cutout IP65 White Fire Rated Downlight with GU10 Holder
£6.90

The Evofire Fire Rated Downlight is a safe and attractive fitting for a GU10 or MR16 LED lamp. The fully open design of the Evofire does not conceal your lamp in a large metal canister, which can trap some of the heat it generates, lowering lamp lifetime and performance. Lamps installed in an Evofire run at up to 10 degrees C cooler than a typical can-style fire rated downlight from leading LED brands - this can extend the lifetime of your lamps.

As well being very tough thanks to its steel construction, The Evofire is also a highly aesthetic choice for Fire Rated lighting. The 1mm blend-in bezel is up to 10 times thinner than typical IP65 rated downlights, with a high quality powder coating and fits almost flush with your ceiling, so the downlight looks discreet and pleasing in any setting.

Evolutionary Fire Rated fitting designed by Integral LED
Developed in the UK - Patent Pending
Fire Rating 30/60/90 minutes - Tested in UKAS Accredited Lab
Ultra-thin 1mm 'blend-in' bezel
Easy to install Loop-in/Loop-out piano-key style terminal block
Supplied with GU10 holder

Partcode: ILDLFR70D001
Range Name: EVOFIRE
Application: Indoor, General Lighting
Market Segment: Commercial indoor, Residential indoor
Product Type: Fire Rated
Warranty: 3 Yrs
CE / RoHS: Yes

Product Finish: Matt white
Material: Steel, Glass
Construction: Pressed Steel, Glass
Length: 39mm
Diameter: 85mm
Weight (Unpackaged Single Unit): 70g
Cut Out Diameter: 70mm
Lum. Shape: Round
Lum. Fixing: Recess mounted
Fire Rating: 30, 60, 90

Integral Evofire 70mm Square IP65 White Fire Rated Downlight + Insulation Guard
£11.94

The Evofire Fire Rated Downlight is a safe and attractive fitting for a GU10 or MR16 LED lamp. The fully open design of the Evofire does not conceal your lamp in a large metal canister, which can trap some of the heat it generates, lowering lamp lifetime and performance. Lamps installed in an Evofire run at up to 10 degrees C cooler than a typical can-style fire rated downlight from leading LED brands - this can extend the lifetime of your lamps.

As well being very tough thanks to its steel construction, The Evofire is also a highly aesthetic choice for Fire Rated lighting. The 1mm blend-in bezel is up to 10 times thinner than typical IP65 rated downlights, with a high quality powder coating and fits almost flush with your ceiling, so the downlight looks discreet and pleasing in any setting.

Evolutionary Fire Rated fitting designed by Integral LED
Developed in the UK - Patent Pending
Fire Rating 30/60/90 minutes - Tested in UKAS Accredited Lab
Ultra-thin 1mm 'blend-in' square bezel
Easy to install Loop-in/Loop-out piano-key style terminal block
Supplied with GU10 holder

• Partcode: ILDLFR70D009
• Range Name: EVOFIRE
• Application: Indoor, General Lighting
• Market Segment: Commercial indoor, Residential indoor
• Product Type: Fire Rated
• Warranty: 3 Yrs
• CE / RoHS: Yes

• Product Finish: Matt white
• Material: Steel, Glass
• Construction: Pressed Steel, Glass
• Length: 83mm
• Diameter: 85mm
• Weight (Unpackaged Single Unit): 120g
• Cut Out Diameter: 70mm
• Lum. Shape: Square
• Lum. Fixing: Recess mounted
• Fire Rating: 30, 60, 90

Integral Evofire 70mm Square IP65 White Fire Rated Downlight with GU10 Holder
£10.38

The Evofire Fire Rated Downlight is a safe and attractive fitting for a GU10 or MR16 LED lamp. The fully open design of the Evofire does not conceal your lamp in a large metal canister, which can trap some of the heat it generates, lowering lamp lifetime and performance. Lamps installed in an Evofire run at up to 10 degrees C cooler than a typical can-style fire rated downlight from leading LED brands - this can extend the lifetime of your lamps.

As well being very tough thanks to its steel construction, The Evofire is also a highly aesthetic choice for Fire Rated lighting. The 1mm blend-in bezel is up to 10 times thinner than typical IP65 rated downlights, with a high quality powder coating and fits almost flush with your ceiling, so the downlight looks discreet and pleasing in any setting.

Evolutionary Fire Rated fitting designed by Integral LED
Developed in the UK - Patent Pending
Fire Rating 30/60/90 minutes - Tested in UKAS Accredited Lab
Ultra-thin 1mm 'blend-in' square bezel
Easy to install Loop-in/Loop-out piano-key style terminal block
Supplied with GU10 holder

Partcode: ILDLFR70D007
Range Name: EVOFIRE
Application: Indoor, General Lighting
Market Segment: Commercial indoor, Residential indoor
Product Type: Fire Rated
Warranty: 3 Yrs
CE / RoHS: Yes

Product Finish: Matt white
Material: Steel, Glass
Construction: Pressed Steel, Glass
Length: 40mm
Diameter: 85mm
Weight (Unpackaged Single Unit): 70g
Cut Out Diameter: 70mm
Lum. Shape: Square
Lum. Fixing: Recess mounted
Fire Rating: 30, 60, 90

Integral Evofire 70mm-100mm Hole Adaptor Kit
£4.68

This high quality, powder coated Adapter expands the bezel of the round Evofire Fire Rated Downlight to increase its cutout diameter to up to 100mm. The Evofire will maintain IP65 and 30, 60 and 90 minutes Fire Rating while using the adapter.

Expands the cutout diameter of the round Evofire Downlight from 70mm to up to 100mm
High quality powder-coated finish
Toughened steel
Matt-white

• Partcode: ILDLFR70D005
• Range Name: EVOFIRE
• Application: Indoor, General Lighting
• Market Segment: Commercial indoor, Residential indoor
• Product Type: Fire Rated
• Warranty: 3 Yrs
• CE / RoHS: Yes

• Product Finish: Matt white
• Material: Steel
• Construction: Pressed Steel
• Length: 3mm
• Diameter: 112mm
• Weight (Unpackaged Single Unit): 50g
• Cut Out Diameter: 100mm
• Lum. Shape: Round
• Lum. Fixing: Recess mounted
• Fire Rating: 30, 60, 90

Integral LED Lux Fire 70mm C/O IP65 6W 3000K Dimmable Fire Rated Downlight
£19.38

Who says you can't have style without safety? Integral LED Lux Fire downlights not only conform to 30, 60 and 90mins fire rating specifications but are also rated to IP65, so they can be used safely in bathrooms. Lux Fire fire-rated downlights have been tailored to deliver a premium finish to any home or business with their low-glare, high-quality light and contemporary design that looks impressive in any setting.

Lux Fire downlights are built using a recessed COB LED light source, providing a beam that has softened edges for a luxurious effect. Supplied with a white scalloped metal bezel (interchangeable). Easy to install with low-profile body. Complete with Loop-in / Loop-out driver. IP65 and Air tightness compliant with Part C and Part L. Resistance to Sound compliant with Part E.

Awarded 4 Stars "Recommended" by Lux Review (January 2016).

• Warm White
• 410 Lumens
• Dimmable
• Matt white finish
• Rated 4 Stars "Recommended" by LUX

• Partcode: ILDLFR70A001
• Range Name: Lux Fire
• Application: Indoor, General Lighting
• Market Segment: Commercial indoor, Residential indoor
• Product Type: Fire Rated
• Warranty: 3 Yrs
• CE / RoHS: Yes

• Product Finish: Matt white
• Spot Type: COB
• Optic: Clear Refractor
• Material: Aluminium alloy, Acrylic, Iron, Intumescent material
• Construction: Extruded Aluminium alloy heat-sink, Iron body, Steel springs and mounting plate, Acrylic diffuser
• Length: 70mm
• Diameter: 85mm
• Weight (Unpackaged Single Unit): 370g
• Cut Out Diameter: 70mm
• Lum. Fixing: Recess mounted
• Fire Rating: 30, 60, 90

• Voltage Range: 220-240V
• Power Consumption: 6.0 Watts
• Current: AC
• Ampage: 500mA
• Frequency Range: 50/60 Hz
• Wattage Equivalent: 38 Watts
• Power Factor: >=0.89
• Dimming: Dimmable with compatible dimmers
• Compatible Dimmer(s): Varilight LED Compatible Range
• LVD Certified: Yes
• EN: EN-60598

• Lumens: 410lm
• Lumens per Watt: 68.0lm/W
• Correlated Colour Temperature (CCT): 3000k
• Beam Angle: 36º
• Colour Temperature: Warm White
• Colour Rendering Index (CRI): >=80
• LED Type: Chip on board (COB)
• Instant on - Less than 1 second: Yes
• Lifetime: 35,000 hrs
• Switching Cycles: >17,500 X

• Lowest Operating Temperature: -20˚c
• Maximum Operating Temperature: 45˚c
• IP (Ingress Protection) Rating: IP65
• Hg 0% (Mercury Free): Yes

Integral LED Lux Fire 70mm C/O IP65 6W 4000K Dimmable Fire Rated Downlight
£19.38

Who says you can't have style without safety? Integral LED Lux Fire downlights not only conform to 30, 60 and 90mins fire rating specifications but are also rated to IP65, so they can be used safely in bathrooms. Lux Fire fire-rated downlights have been tailored to deliver a premium finish to any home or business with their low-glare, high-quality light and contemporary design that looks impressive in any setting.

Lux Fire downlights are built using a recessed COB LED light source, providing a beam that has softened edges for a luxurious effect. Supplied with a white scalloped metal bezel (interchangeable). Easy to install with low-profile body. Complete with Loop-in / Loop-out driver. IP65 and Air tightness compliant with Part C and Part L. Resistance to Sound compliant with Part E.

Awarded 4 Stars "Recommended" by Lux Review

• Cool White
• 410 Lumens
• Dimmable
• Matt white finish
• Rated 4 Stars "Recommended" by LUX

• Partcode: ILDLFR70A002
• Range Name: Lux Fire
• Application: Indoor, General Lighting
• Market Segment: Commercial indoor, Residential indoor
• Product Type: Fire Rated
• Warranty: 3 Yrs
• CE / RoHS: Yes

• Product Finish: Matt white
• Spot Type: COB
• Optic: Clear Refractor
• Material: Aluminium alloy, Acrylic, Iron, Intumescent material
• Construction: Extruded Aluminium alloy heat-sink, Iron body, Steel springs and mounting plate, Acrylic diffuser
• Length: 70mm
• Diameter: 85mm
• Weight (Unpackaged Single Unit): 370g
• Cut Out Diameter: 70mm
• Lum. Fixing: Recess mounted
• Fire Rating: 30, 60, 90

• Voltage Range: 220-240V
• Power Consumption: 6.0 Watts
• Current: AC
• Ampage: 500mA
• Frequency Range: 50/60 Hz
• Wattage Equivalent: 38 Watts
• Power Factor: >=0.89
• Dimming: Dimmable with compatible dimmers
• Compatible Dimmer(s): Varilight LED Compatible Dimmers
• LVD Certified: Yes
•EN: EN-60598

• Lumens: 410lm
• Lumens per Watt: 68.0lm/W
• Correlated Colour Temperature (CCT): 4000k
• Beam Angle: 36º
• Colour Temperature: Cool White
• Colour Rendering Index (CRI): >=80
• LED Type: Chip on board (COB)
• Instant on - Less than 1 second: Yes
• Lifetime: 35,000 hrs
• Switching Cycles: >17,500 X

• Lowest Operating Temperature: -20˚c
• Maximum Operating Temperature: 45˚c
• IP (Ingress Protection) Rating: IP65
• Hg 0% (Mercury Free): Yes

Integral LED Lux Fire 70mm C/O IP65 9W 3000K Dimmable Fire Rated Downlight
£19.20

Who says you can't have style without safety? Integral LED Lux Fire downlights not only conform to 30, 60 and 90mins fire rating specifications but are also rated to IP65, so they can be used safely in bathrooms. Lux Fire fire-rated downlights have been tailored to deliver a premium finish to any home or business with their low-glare, high-quality light and contemporary design that looks impressive in any setting.

Lux Fire downlights are built using a recessed COB LED light source, providing a beam that has softened edges for a luxurious effect. Supplied with a white scalloped metal bezel (interchangeable). Easy to install with low-profile body. Complete with Loop-in / Loop-out driver. IP65 and Air tightness compliant with Part C and Part L. Resistance to Sound compliant with Part E.

Awarded 4 Stars "Recommended" by Lux Review

Warm White
640 Lumens
Dimmable
Matt white finish
Rated 4 Stars "Recommended" by LUX

• Partcode: ILDLFR70A005
• Range Name: Lux Fire
• Application: Indoor, General Lighting
• Market Segment: Commercial indoor, Residential indoor
• Product Type: Fire Rated
• Warranty: 3 Yrs
• CE / RoHS: Yes

• Product Finish: Matt white
• Spot Type: COB
• Optic: Clear Refractor
• Material: Aluminium alloy, Acrylic, Iron, Intumescent material
• Construction: Extruded Aluminium alloy heat-sink, Iron body, Steel springs and mounting plate, Acrylic diffuser
• Length: 70mm
• Diameter: 85mm
• Weight (Unpackaged Single Unit): 370g
• Cut Out Diameter: 70mm
• Lum. Fixing: Recess mounted
• Fire Rating: 30, 60, 90

• Voltage Range: 220-240V
• Power Consumption: 9.0 Watts
• Current: AC
• Ampage: 190mA
• Frequency Range: 50/60 Hz
• Wattage Equivalent: 51 Watts
• Power Factor: >=0.89
• Dimming: Dimmable with compatible dimmers
• Compatible Dimmer(s): Varilight
• LVD Certified: Yes
• EN: EN-60598

• Lumens: 640lm
• Lumens per Watt: 71.0lm/W
• Correlated Colour Temperature (CCT): 3000k
• Beam Angle: 55º
• Colour Temperature: Warm White
• Colour Rendering Index (CRI): >=80
• LED Type: Chip on board (COB)
• Instant on - Less than 1 second: Yes
• Lifetime: 35,000 hrs
• Switching Cycles: >17,500 X

Integral LED Lux Fire 70mm C/O IP65 9W 4000K Dimmable Fire Rated Downlight
£19.20

Who says you can't have style without safety? Integral LED Lux Fire downlights not only conform to 30, 60 and 90mins fire rating specifications but are also rated to IP65, so they can be used safely in bathrooms. Lux Fire fire-rated downlights have been tailored to deliver a premium finish to any home or business with their low-glare, high-quality light and contemporary design that looks impressive in any setting.

Lux Fire downlights are built using a recessed COB LED light source, providing a beam that has softened edges for a luxurious effect. Supplied with a white scalloped metal bezel (interchangeable). Easy to install with low-profile body. Complete with Loop-in / Loop-out driver. IP65 and Air tightness compliant with Part C and Part L. Resistance to Sound compliant with Part E.

Awarded 4 Stars "Recommended" by Lux Review

• Cool White
• 640 Lumens
• Dimmable
• Matt white finish
• Rated 4 Stars "Recommended" by LUX

• Partcode: ILDLFR70A006
• Range Name: Lux Fire
• Application: Indoor, General Lighting
• Market Segment: Commercial indoor, Residential indoor
• Product Type: Fire Rated
• Warranty: 3 Yrs
• CE / RoHS: Yes

• Product Finish: Matt white
• Spot Type: COB
• Optic: Clear Refractor
• Material: Aluminium alloy, Acrylic, Iron, Intumescent material
• Construction: Extruded Aluminium alloy heat-sink, Iron body, Steel springs and mounting plate, Acrylic diffuser
• Length: 70mm
• Diameter: 85mm
• Weight (Unpackaged Single Unit): 370g
• Cut Out Diameter: 70mm
• Lum. Fixing: Recess mounted
• Fire Rating: 30, 60, 90

• Voltage Range: 220-240V
• Power Consumption: 9.0 Watts
• Current: AC
• Ampage: 190mA
• Frequency Range: 50/60 Hz
• Wattage Equivalent: 51 Watts
• Power Factor: >=0.89
• Dimming: Dimmable with compatible dimmers
• Compatible Dimmer(s): Varilight
• LVD Certified: Yes
• EN: EN-60598

• Lumens: 640lm
• Lumens per Watt: 71.0lm/W
• Correlated Colour Temperature (CCT): 4000k
• Beam Angle: 55º
• Colour Temperature: Cool White
• Colour Rendering Index (CRI): >=80
• LED Type: Chip on board (COB)
• Instant on - Less than 1 second: Yes
• Lifetime: 35,000 hrs
• Switching Cycles: >17,500 X

Integral LED Lux Fire 70mm C/O Satin IP65 6W 3000K Tilt Dimmable Fire Rated
£21.60

Style, safety and flexibility - Integral LED Lux Fire Tiltable downlights not only conform to 30, 60 and 90mins fire rating specifications but are also rated to IP65, so they can be used safely in bathrooms. Lux Fire Tiltable fire-rated downlights have been tailored to deliver a premium finish to any home or business with their low-glare, high-quality light and contemporary design that looks impressive in any setting. This adjustable fitting can be tilted to illuminate specific areas or features in a room.

Lux Fire downlights are built using a recessed COB LED light source, providing a beam that has softened edges for a luxurious effect. Complete with Loop-in / Loop-out driver. IP65 and Air tightness compliant with Part C and Part L. Resistance to Sound compliant with Part E.

• Warm White
• 430 Lumens
• Dimmable
• 36 deg beam angle
• satin nickel finish

•Partcode: ILDLFR92C015
• Range Name: Lux Fire
• Application: Indoor, General Lighting
• Market Segment: Commercial indoor, Residential indoor
• Product Type: Fire Rated
• Warranty: 3 Yrs
• CE / RoHS: Yes

• Spot Type: COB
• Optic: Clear Refractor
• Material: Aluminium alloy, Acrylic, Iron, Intumescent material
• Construction: Extruded Aluminium alloy heat-sink, Iron body, Steel springs and mounting plate, Acrylic diffuser
• Length: 64mm
• Diameter: 100mm
• Weight (Unpackaged Single Unit): 420g
• Cut Out Diameter: 92mm
• Lum. Fixing: Recess mounted
• Fire Rating: 30, 60, 90

• Power Consumption: 6.0 Watts
• Current: AC
• Ampage: 500mA
• Frequency Range: 50/60 Hz
• Wattage Equivalent: 41 Watts
• Power Factor: >=0.89
• Dimming: Dimmable with compatible dimmers
• Compatible Dimmer(s): Varilight
• LVD Certified: Yes
• EN: EN-60598

• Lumens: 430lm
• Lumens per Watt: 72.0lm/W
• Correlated Colour Temperature (CCT): 3000k
• Beam Angle: 36º
• Colour Temperature: Warm
• Colour Rendering Index (CRI): >=80
• LED Type: Chip-on-board (COB)
• Instant on - Less than 1 second: Yes
• Lifetime: 35,000 hrs
• Switching Cycles: >17,500 X

Integral LED Lux Fire 70mm C/O Satin IP65 6W 4000K Tilt Dimmable Fire Rated
£21.60

Style, safety and flexibility - Integral LED Lux Fire Tiltable downlights not only conform to 30, 60 and 90mins fire rating specifications but are also rated to IP65, so they can be used safely in bathrooms. Lux Fire Tiltable fire-rated downlights have been tailored to deliver a premium finish to any home or business with their low-glare, high-quality light and contemporary design that looks impressive in any setting. This adjustable fitting can be tilted to illuminate specific areas or features in a room.

Lux Fire downlights are built using a recessed COB LED light source, providing a beam that has softened edges for a luxurious effect. Complete with Loop-in / Loop-out driver. IP65 and Air tightness compliant with Part C and Part L. Resistance to Sound compliant with Part E.

• Cool White
• 450 Lumens
• Dimmable
• 36 deg beam angle
• satin nickel finish

• Partcode: ILDLFR92C016
• Range Name: Lux Fire
•Application: Indoor, General Lighting
• Market Segment: Commercial indoor, Residential indoor
• Product Type: Fire Rated
• Warranty: 3 Yrs
• CE / RoHS: Yes

• Spot Type: COB
• Optic: Clear Refractor
• Material: Aluminium alloy, Acrylic, Iron, Intumescent material
• Construction: Extruded Aluminium alloy heat-sink, Iron body, Steel springs and mounting plate, Acrylic diffuser
• Length: 64mm
• Diameter: 100mm
• Weight (Unpackaged Single Unit): 420g
• Cut Out Diameter: 92mm
• Lum. Fixing: Recess mounted
• Fire Rating: 30, 60, 90

• Power Consumption: 6.0 Watts
• Current: AC
• Ampage: 500mA
• Frequency Range: 50/60 Hz
• Wattage Equivalent: 41 Watts
• Power Factor: >=0.89
• Dimming: Dimmable with compatible dimmers
• Compatible Dimmer(s): Varilight
• LVD Certified: Yes
• EN: EN-60598

• Lumens: 450lm
• Lumens per Watt: 75.0lm/W
• Correlated Colour Temperature (CCT): 4000k
• Beam Angle: 36º
• Colour Temperature: Cool White
• Colour Rendering Index (CRI): >=80
• LED Type: Chip-on-board (COB)
• Instant on - Less than 1 second: Yes
• Lifetime: 35,000 hrs
• Switching Cycles: >17,500 X

Integral LED Lux Fire 92mm C/O IP65 6W 3000K Tilt Dimmable Fire Rated Downlight
£21.30

Style, safety and flexibility - Integral LED Lux Fire Tiltable downlights not only conform to 30, 60 and 90mins fire rating specifications but are also rated to IP65, so they can be used safely in bathrooms. Lux Fire Tiltable fire-rated downlights have been tailored to deliver a premium finish to any home or business with their low-glare, high-quality light and contemporary design that looks impressive in any setting. This adjustable fitting can be tilted to illuminate specific areas or features in a room.

Lux Fire downlights are built using a recessed COB LED light source, providing a beam that has softened edges for a luxurious effect. Complete with Loop-in / Loop-out driver. IP65 and Air tightness compliant with Part C and Part L. Resistance to Sound compliant with Part E.

• Tiltable
• Warm White
• 430 Lumens
• Dimmable
• Matt white finish
• 30 degree tilt range

• Partcode: ILDLFR92C001
• Range Name: Lux Fire
• Application: Indoor, General Lighting
• Market Segment: Commercial indoor, Residential indoor
• Product Type: Fire Rated
• Warranty: 3 Yrs
• CE / RoHS: Yes

• Product Finish: Matt white
• Spot Type: COB
• Optic: Clear Refractor
• Material: Aluminium alloy, Acrylic, Iron, Intumescent material
• Construction: Extruded Aluminium alloy heat-sink, Iron body, Steel springs and mounting plate, Acrylic diffuser
• Length: 64mm
• Diameter: 100mm
• Weight (Unpackaged Single Unit): 420g
• Cut Out Diameter: 92mm
• Lum. Fixing: Recess mounted
• Fire Rating: 30, 60, 90

• Voltage Range: 220-240V
• Power Consumption: 6.0 Watts
• Current: AC
• Ampage: 500mA
• Frequency Range: 50/60 Hz
• Wattage Equivalent: 40 Watts
• Power Factor: >=0.89
• Dimming: Dimmable with compatible dimmers
• Compatible Dimmer(s): Varilight JQP401W
• LVD Certified: Yes
• EN: EN-60598

• Lumens: 430lm
• Lumens per Watt: 72.0lm/W
• Correlated Colour Temperature (CCT): 3000k
• Beam Angle: 36º
• Colour Temperature: Warm White
• Colour Rendering Index (CRI): >=80
• LED Type: Chip on board (COB)
• Instant on - Less than 1 second: Yes
• Lifetime: 35,000 hrs
• Switching Cycles: >17,500 X

Integral LED Lux Fire 92mm C/O IP65 6W 4000K Tilt Dimmable Fire Rated Downlight
£21.24

Style, safety and flexibility - Integral LED Lux Fire Tiltable downlights not only conform to 30, 60 and 90mins fire rating specifications but are also rated to IP65, so they can be used safely in bathrooms. Lux Fire Tiltable fire-rated downlights have been tailored to deliver a premium finish to any home or business with their low-glare, high-quality light and contemporary design that looks impressive in any setting. This adjustable fitting can be tilted to illuminate specific areas or features in a room.

Lux Fire downlights are built using a recessed COB LED light source, providing a beam that has softened edges for a luxurious effect. Complete with Loop-in / Loop-out driver. IP65 and Air tightness compliant with Part C and Part L. Resistance to Sound compliant with Part E.

• Tiltable
• Cool White
• 450 Lumens
• Dimmable
• Matt white finish
• 30 degree tilt range

• Partcode: ILDLFR92C003
• Range Name: Lux Fire
• Application: Indoor, General Lighting
• Market Segment: Commercial indoor, Residential indoor
• Product Type: Fire Rated
• Warranty: 3 Yrs
• CE / RoHS: Yes

• Product Finish: Matt white
• Spot Type: COB
• Optic: Clear Refractor
• Material: Aluminium alloy, Acrylic, Iron, Intumescent material
• Construction: Extruded Aluminium alloy heat-sink, Iron body, Steel springs and mounting plate, Acrylic diffuser
• Length: 64mm
• Diameter: 100mm
• Weight (Unpackaged Single Unit): 420g
• Cut Out Diameter: 92mm
• Lum. Fixing: Recess mounted
• Fire Rating: 30, 60, 90

• Voltage Range: 220-240V
• Power Consumption: 6.0 Watts
• Current: AC
• Ampage: 500mA
• Frequency Range: 50/60 Hz
• Wattage Equivalent: 41 Watts
• Power Factor: >=0.89
• Dimming: Dimmable with compatible dimmers
• Compatible Dimmer(s): Varilight
• LVD Certified: Yes
• EN: EN-60598

• Lumens: 450lm
• Lumens per Watt: 75.0lm/W
• Correlated Colour Temperature (CCT): 4000k
• Beam Angle: 36º
• Colour Temperature: Cool White
• Colour Rendering Index (CRI): >=80
• LED Type: Chip on board (COB)
• Instant on - Less than 1 second: Yes
• Lifetime: 35,000 hrs
• Switching Cycles: >17,500 X

Integral LED Lux Fire 92mm C/O IP65 9W 3000K Tilt Dimmable Fire Rated Downlight
£23.58

Style, safety and flexibility - Integral LED Lux Fire Tiltable downlights not only conform to 30, 60 and 90mins fire rating specifications but are also rated to IP65, so they can be used safely in bathrooms. Lux Fire Tiltable fire-rated downlights have been tailored to deliver a premium finish to any home or business with their low-glare, high-quality light and contemporary design that looks impressive in any setting. This adjustable fitting can be tilted to illuminate specific areas or features in a room.

Lux Fire downlights are built using a recessed COB LED light source, providing a beam that has softened edges for a luxurious effect. Complete with Loop-in / Loop-out driver. IP65 and Air tightness compliant with Part C and Part L. Resistance to Sound compliant with Part E.

• Tiltable
• Warm White
• 650 Lumens
• Dimmable
• Matt white finish
• 30 degree tilt range

• Partcode: ILDLFR92C005
• Range Name: Lux Fire
• Application: Indoor, General Lighting
• Market Segment: Commercial indoor, Residential indoor
• Product Type: Fire Rated
• Warranty: 3 Yrs
• CE / RoHS: Yes

• Product Finish: Matt white
• Spot Type: COB
• Optic: Clear Refractor
• Material: Aluminium alloy, Acrylic, Iron, Intumescent material
• Construction: Extruded Aluminium alloy heat-sink, Iron body, Steel springs and mounting plate, Acrylic diffuser
• Length: 64mm
• Diameter: 100mm
• Weight (Unpackaged Single Unit): 420g
• Cut Out Diameter: 92mm
• Lum. Fixing: Recess mounted
• Fire Rating: 30, 60, 90

• Voltage Range: 220-240V
• Power Consumption: 9.0 Watts
• Current: AC
• Ampage: 200mA
• Frequency Range: 50/60 Hz
• Wattage Equivalent: 51 Watts
• Power Factor: >=0.89
• Dimming: Dimmable with compatible dimmers
• Compatible Dimmer(s): Varilight
• LVD Certified: Yes
• EN: EN-60598

• Lumens: 650lm
• Lumens per Watt: 72.0lm/W
• Correlated Colour Temperature (CCT): 3000k
• Beam Angle: 36º
• Colour Temperature: Warm White
• Colour Rendering Index (CRI): >=80
• LED Type: Chip on board (COB)
• Instant on - Less than 1 second: Yes
• Lifetime: 35,000 hrs
• Switching Cycles: >17,500 X

Integral LED Polished Chrome Low Profile 6W 3000K Warm White 430 Lumen Dimmable
£13.20

• Warranty: 3 Yrs
• Product Finish: Polished Chrome
• Spot Type: COB
• Optic: Clear Refractor
• Material: Aluminium alloy, Iron, Intumescent material, Steel
• Construction: Extruded Aluminium heat-sink, Iron body, Steel springs and mounting plate
• Length: 58mm
• Diameter: 85mm
• Lum. Fixing: Recess mounted
• Fire Rating: 30, 60, 90
• Voltage Range: 220-240V
• Power Consumption: 6.0 Watts
• Current: AC
• Ampage: 300mA
• Frequency Range: 50/60 Hz
• Power Factor: >=0.90
• Dimming: Dimmable with compatible dimmers
• Compatible Dimmer(s): Varilight LED Compatible Range
• LVD Certified: Yes
• EN: EN-60598

Integral LED Polished Chrome Low Profile 6W 4000K Cool  White 430 Lumen Dimmable
£13.20

• Warranty: 3 Yrs
• Product Finish: Polished Chrome
• Spot Type: COB
• Optic: Clear Refractor
• Material: Aluminium alloy, Iron, Intumescent material, Steel
• Construction: Extruded Aluminium heat-sink, Iron body, Steel springs and mounting plate
• Length: 58mm
• Diameter: 85mm
• Lum. Fixing: Recess mounted
• Fire Rating: 30, 60, 90
• Voltage Range: 220-240V
• Power Consumption: 6.0 Watts
• Current: AC
• Ampage: 300mA
• Frequency Range: 50/60 Hz
• Power Factor: >=0.90
• Dimming: Dimmable with compatible dimmers
• Compatible Dimmer(s): Varilight LED Compatible Range
• LVD Certified: Yes
• EN: EN-60598

Integral LED Satin Nickel Low Profile 6W 3000K Warm White 430 Lumen Dimmable
£13.20

• Warranty: 3 Yrs
• Product Finish: Satin Nickel
• Spot Type: COB
• Optic: Clear Refractor
• Material: Aluminium alloy, Iron, Intumescent material, Steel
• Construction: Extruded Aluminium heat-sink, Iron body, Steel springs and mounting plate
• Length: 58mm
• Diameter: 85mm
• Lum. Fixing: Recess mounted
• Fire Rating: 30, 60, 90
• Voltage Range: 220-240V
• Power Consumption: 6.0 Watts
• Current: AC
• Ampage: 300mA
• Frequency Range: 50/60 Hz
• Power Factor: >=0.90
• Dimming: Dimmable with compatible dimmers
• Compatible Dimmer(s): Varilight LED Compatible Range
• LVD Certified: Yes
• EN: EN-60598

Integral LED Satin Nickel Low Profile 6W 4000K Cool  White 440 Lumen Dimmable
£13.20

• Warranty: 3 Yrs
• Product Finish: Satin Nickel
• Spot Type: COB
• Optic: Clear Refractor
• Material: Aluminium alloy, Iron, Intumescent material, Steel
• Construction: Extruded Aluminium heat-sink, Iron body, Steel springs and mounting plate
• Length: 58mm
• Diameter: 85mm
• Lum. Fixing: Recess mounted
• Fire Rating: 30, 60, 90
• Voltage Range: 220-240V
• Power Consumption: 6.0 Watts
• Current: AC
• Ampage: 300mA
• Frequency Range: 50/60 Hz
• Power Factor: >=0.90
• Dimming: Dimmable with compatible dimmers
• Compatible Dimmer(s): Varilight LED Compatible Range
• LVD Certified: Yes
• EN: EN-60598

Integral LED White Low Profile 6W 3000K Warm White 430 Lumen Dimmable
£11.94

• Warranty: 3 Yrs
• Product Finish: Matt white
• Spot Type: COB
• Optic: Clear Refractor
• Material: Aluminium alloy, Iron, Intumescent material, Steel
• Construction: Extruded Aluminium heat-sink, Iron body, Steel springs and mounting plate
• Length: 58mm
• Diameter: 85mm
• Lum. Fixing: Recess mounted
• Fire Rating: 30, 60, 90
• Voltage Range: 220-240V
• Power Consumption: 6.0 Watts
• Current: AC
• Ampage: 300mA
• Frequency Range: 50/60 Hz
• Wattage Equivalent: 40 Watts
• Power Factor: >=0.90
• Dimming: Dimmable with compatible dimmers
• Compatible Dimmer(s): Varilight LED Compatible Range
• LVD Certified: Yes
• EN: EN-60598

Integral LED White Low Profile 6W 4000K Cool White 430 Lumen Dimmable
£11.94

• Warranty: 3 Yrs
• Product Finish: Matt white
• Spot Type: COB
• Optic: Clear Refractor
• Material: Aluminium alloy, Iron, Intumescent material, Steel
• Construction: Extruded Aluminium heat-sink, Iron body, Steel springs and mounting plate
• Length: 58mm
• Diameter: 85mm
• Lum. Fixing: Recess mounted
• Fire Rating: 30, 60, 90
• Voltage Range: 220-240V
• Power Consumption: 6.0 Watts
• Current: AC
• Ampage: 300mA
• Frequency Range: 50/60 Hz
• Power Factor: >=0.90
• Dimming: Dimmable with compatible dimmers
• Compatible Dimmer(s): Varilight LED Compatible Range
• LVD Certified: Yes
• EN: EN-60598

1 2
Come and visit us for better than internet prices
Cranbrook Electrics

Cranbrook Electrics - established 1973. Based in Loughton, Essex we have been supplying the public as well as trade with lighting and electrical goods for over 25 years.

Dealing directly with many manufacturers and with contacts elsewhere we are confident in supplying all your needs.

Just a few of the brands we ared able to supply to you at competitive prices - BG, MK, Astro lighting, Searchlight, Endon, Dar, Axiom, Integral LED, Bell Lighting and many more.

For all your electrical wiring, cable, switches and sockets visit our showroom. Further Discounts Apply in Store*

My Account

Secure online ordering

All major payment options accepted

© 2019 Cranbrook Electrics

Ecommerce solution by Etail Systems